I've looked, but I can't find....
What is the order of the relays (not fuses) on a 2003 California Hydro? From left to right, there is a group of 4, space then one, space then one.
My bike just up and quit on me- I happened to be pulling in my driveway at the time (how convenient!) and thought I ran out of gas. But I put some gas in from a can, it started and ran just fine to the station where it didn't take much to fill it. I thought that was weird, but whatever. Started up to head home and it died on me again, so I pulled into some shade, checked the fuses, jiggled the relays and various wires, this and that and it started again. Almost made it home, but it died again and no amount of jiggling would encourage it to start.
The starter works just fine. The fuel pump works just fine. I long-ago disconnected the side-stand interlock. So, I thought maybe it is one of the relays, so I swapped (left to right is 1-6) relays 1 and 2. Relay 1 was really, really hard to get out, but didn't look too corroded. Anyhow- after swapping 1 and 2 it started right up and ran fine, but the horn isn't working now. So- is relay #1 the ECU and relay #2 the horn? These are all Tyco relays, btw. I thought only the Seimens were the ones to replace. I guess I should replace at least one of them now...Does Pyro Dan still sell relays?