Wildguzzi.com

General Category => General Discussion => Topic started by: pehayes on November 28, 2021, 11:19:58 AM

Title: NGC: Tool Measure Please
Post by: pehayes on November 28, 2021, 11:19:58 AM

I need to buy a "flare wrench" but it might not work so I don't want to blow the investment.
Does anyone have a 7/8" flare wrench available?  I need to know the opening width dimension to confirm if it will fit my application.
I have flare wrenches, but not one that large.

Patrick Hayes
Fremont CA

Title: Re: NGC: Tool Measure Please
Post by: lucian on November 28, 2021, 11:31:45 AM

(https://i.ibb.co/PxW6KSj/IMG-1891.jpg) (https://ibb.co/PxW6KSj)


In Inches

Title: Re: NGC: Tool Measure Please
Post by: lucian on November 28, 2021, 11:41:07 AM

(https://i.ibb.co/NVWr3HB/IMG-1894.jpg) (https://ibb.co/NVWr3HB)


In MM.  Wrench is a craftsman

Title: Re: NGC: Tool Measure Please
Post by: pehayes on November 28, 2021, 11:50:05 AM

Thanks.  That will fit.  I'll order the wrench.

Patrick Hayes
Fremont CA

Title: Re: NGC: Tool Measure Please
Post by: guzziart on November 28, 2021, 02:48:19 PM

FWIW and you want to go "thrifty". 

https://www.amazon.com/DURATECH-3-piece-Vanadium-Organizer-Included/dp/B08F9VJ27W/ref=pd_day0_2/143-4534112-8266760?pd_rd_w=3Szo4&pf_rd_p=8ca997d7-1ea0-4c8f-9e14-a6d756b83e30&pf_rd_r=5D8JQ3ANSY04AYRCM0WF&pd_rd_r=53bbf9da-5422-497e-872e-270bc198a5f5&pd_rd_wg=YiUya&pd_rd_i=B08F9VJ27W&th=1

Also, whatever you order may not have been manufactured to the same "open" specs as the pic in an earlier post but a little work with a cut-off wheel or die grinder woud do the trick.