Recent Posts

1

General Discussion / Re: T3 Dashboard Options

« Last post by frozengoose on Today at 01:53:05 AM »

consider this  https://www.mgcycle.com/index.php?main_page=product_info&cPath=276&products_id=4885

Here's what it looks like on my T. Never had any problems with it...

2

General Discussion / Re: T3 Dashboard Options

« Last post by Scout63 on Today at 01:09:33 AM »

I used that dash plate with Motogadget gauges and cups on my G5 build.  It fits and works well, but I ended up going back to the stock T3 gauges and mounts.  I thought they looked better. The idiot light lenses in the stock top plate are very fiddly.

3

General Discussion / Re: Identifying and stripping silencers?

« Last post by bigbikerrick on Today at 12:00:20 AM »

I dont think your chrome plating is any good. There is quite a bit of rust that I can see. If those were mine, I would sand blast them to bare metal, and paint them with high heat paint, or have them ceramic coated.
Rick.

4

General Discussion / Re: What is this part?

« Last post by Air-Cooled on April 15, 2024, 10:28:55 PM »

Yes, that must be it!  I found it next to the front wheel after wiping it down between the spokes.  Thanks!

5

General Discussion / Re: What is this part?

« Last post by John A on April 15, 2024, 09:59:03 PM »

Wheel weight? Possibly for on a spoke

6

General Discussion / What is this part?

« Last post by Air-Cooled on April 15, 2024, 08:44:20 PM »

I was cleaning up my Guzzi V7 Sport this week, replaced fuel lines, breather hose and air intake box.  When I was all done and everything reassembled, I found this dime-sized piece on the floor. Can anyone identify it?  (I can't) 

7

General Discussion / Re: May, Tn Ga Al guzzi meet n greet lunch

« Last post by bobrebos1 on April 15, 2024, 08:10:59 PM »

May 25th, at 12 noon local time.  Hope to see some of you there!

8

General Discussion / Re: NAR. 4th Southeastern U.S. Guzzi campout!

« Last post by bobrebos1 on April 15, 2024, 08:06:11 PM »

Bumpity bump for the big Southeastern U.S. Moto Guzzi enthusiasts campout.  Come on people, get your tent ready!  Come see “Bird the crazy dog”!  Lol

9

General Discussion / Re: April meet n greet lunch, Ga/Tn/Nc etc

« Last post by bobrebos1 on April 15, 2024, 08:01:22 PM »

Bumpity bump…12 days out for those of you that can make it!  I unfortunately cannot as there’s a new grand baby coming then!  Scheduled delivery due to complications.  Have fun

10

General Discussion / Re: First Rebuild (just a stupid story)

« Last post by brider on April 15, 2024, 07:28:02 PM »

100% great story and trip down memory lane. THAT'S how a dad SHOULD teach. My experience was very similar (the oil thing sounds familiar, I remember dad saying to just use some straight 30W we had for the mower), except my dad didn't lend any guidance. How did you determine the correct drill rod # to use as replacement needles? I assume that's what you used it for....