New 20 ounce tumblers available now! Forum donation credit with purchase. https://www.wildguzzi.com/Products/products.htm#Tumbler
Setting my TPS/ baseline as perhttps://archive.guzzitech.com/EVTuneup-Jeff_B.htmli donít have a twin max, but i do have a carbtune, will that work? and is this the port i would tap into?
To start with a big for tackling this. I'm pretty sure I posted this link as well as the text only one:https://bradthebikeboy.blogspot.com/2012/10/throttle-position-sensor-setting_21.html
Congrats, sort of!!! Your getting there!You did make sure the plastic linkage between the TB's easily slid over the pin it goes on right??
Forgive me if I'm mistaken, but following your posts I think your dealing with the large p8 computer box?Did you try any adjustments to the pot on the box?
Ďchokeí is off,
yep, slipped on no bother. I canít back out the RH adjuster, itís fully out, and the air bleeds are fully in, linkage is off, Ďchokeí is off, and idle is 1400 at .525
back fire is cool no! ??
No. I wouldn't go any farther until I adjusted the valves as recommended by others. That is square one before you start tuning.
everything was backed out (air in). i was the same as you Tom and couldnít get it to idle at all at .385, i had to have the RH in a touch, surprised that yours was so low with .525. I just learned how to do it so i canít really trouble shoot. itís running quite well now apart from a backfire. back fire is cool no! ??
Page created in 0.02 seconds with 23 queries.