Wildguzzi.com

General Category => General Discussion => Topic started by: glenm64 on June 17, 2022, 03:14:35 AM

Title: Tonti solo seat mounting bracket dimensions
Post by: glenm64 on June 17, 2022, 03:14:35 AM
Hi folks
I want to make the brackets for mounting a solo seat on a Tonti. I know there is a Harpers type seat available that doesnt need brackets, but I would like to have the factory T3 police solo seat style.
Can anyone provide me the dimensions to the attached images please. I know they are left and right handed brackets. I forgot to ask for the flat brackets thickness in the drawing so that would be appreciated also.
Thanks in advance for the assistance.
Cheers Glen
 
(https://i.ibb.co/fVWZS5L/seat-hinge-bracket-dimensions.jpg) (https://ibb.co/fVWZS5L)

(https://i.ibb.co/3hdSsQK/Brackets-dimensions.png) (https://ibb.co/3hdSsQK)

(https://i.ibb.co/483712z/Bracket-Dimensions-2.png) (https://ibb.co/483712z)

Title: Re: Tonti solo seat mounting bracket dimensions
Post by: Mike Craven on June 18, 2022, 09:24:45 AM
Hey Glen, I don't know what you're writing about.  Are you missing a link after "...but I would like to have this style" ?  I have a Cali II, but don't Tonti seat mounts differ?  Someone like me needs an explanation of your drawings to be able to help.
Later, cheers,
-Mike-
Title: Re: Tonti solo seat mounting bracket dimensions
Post by: glenm64 on June 18, 2022, 06:34:09 PM
Hi Mike
I edited my initial post for (hopefully) a bit more clarity.
I want to make the brackets for mounting a police solo seat similar to that on T3's. Hopefully these pictures will clarify what Im after.
 
Im after.
(https://i.ibb.co/FnhNv9C/solo-seat-3.jpg) (https://ibb.co/FnhNv9C)

(https://i.ibb.co/rtHD9Pj/Solo-seat-2.jpg) (https://ibb.co/rtHD9Pj)

(https://i.ibb.co/1XRLqDV/Solo-seat-rack-R-17463540.jpg) (https://ibb.co/1XRLqDV)

(https://i.ibb.co/Qr645DF/IMG-0764.jpg) (https://ibb.co/Qr645DF)

(https://i.ibb.co/H2SzwVY/Screenshot-2022-06-19-072825.jpg) (https://ibb.co/H2SzwVY)
Title: Re: Tonti solo seat mounting bracket dimensions
Post by: Mike Craven on June 25, 2022, 05:27:22 PM
I can't help, but very surprised no one has chimed in.