Wildguzzi.com

General Category => General Discussion => Topic started by: 1down5up on March 27, 2020, 02:12:04 AM

Title: Disk Front brake line length - v7 sport
Post by: 1down5up on March 27, 2020, 02:12:04 AM

All, had a search but didn't turn up anything.

I'm rebuilding a particularly ratty lm2 into a V7 sport clone and am hoping someone can help me with brake line length for twin disks (front mount callipers), along with line length from the rear m/c to the rear caliper(no hard line, braided hose all the way)

Anyone with a tonti with delinked front brakes and clipons have a length?

Title: Re: Disk Front brake line length - v7 sport
Post by: 1down5up on March 27, 2020, 02:47:17 PM

Quote from: 73 sport on March 27, 2020, 08:35:41 AM

'73/'74 Sport. Length of original brake lines. Center of banjo bolt hole to center of opposite end banjo bolt hole. Master cyl. to manifold:12 3/8". Manifold to each caliper: 19 5/16". Horst.

Thanks alot for your reply, just to confirm.

Your set up is single line to a manifold splitter, then twin lines down to the callipers (on front of forks).