Author Topic: alternative 98 EV turn signals  (Read 1348 times)

Offline flower_king001

  • Gaggle Mentor
  • ****
  • *
  • Posts: 929
  • Location: South/Middle/TN
alternative 98 EV turn signals
« on: October 15, 2022, 06:06:30 AM »
OEM turn signals on 1998 replaced 2 X's in the past 10 or so years.

I'm now looking for folks who have actually replaced with an alternative source.
Current Fleet

1971 BMW R90/5
1986 Moto Guzzi Lemans IV 1000
1998 Moto Guzzi 1100 EV
2005 BMW 1200 RT
2007 BMW 1200 GS
2007 Moto Guzzi Breva 1100

Offline fotoguzzi

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • Posts: 19931
  • vee git tooh soon oldt und too late wise -my Dad
Re: alternative 98 EV turn signals
« Reply #1 on: October 15, 2022, 07:55:50 AM »
Some Buells use a similar but more flexible stem.
MINNEAPOLIS, MN

Offline Wayne Orwig

  • Gaggle Hero
  • *****
  • Posts: 13908
    • Hog Mountain weather
  • Location: Hog Mountain
Re: alternative 98 EV turn signals
« Reply #2 on: October 15, 2022, 08:03:18 AM »
I'm looking into making replacements with my 3D printer.
Not sure it will work out.
Scientist have discovered that people will believe anything, if you first say "Scientists have discovered...."

Online Ncdan

  • Global Moderator
  • Gaggle Hero
  • *
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 5878
Re: alternative 98 EV turn signals
« Reply #3 on: October 15, 2022, 09:02:33 AM »
I'm looking into making replacements with my 3D printer.
Not sure it will work out.
This issue has been discussed number times in the past. Someone else suggested making the rubber part that always deteriorate, maybe out of a more durable material.
I’ve monkey rigged all four of mine on my 2002 Stone.
Please Wayne, by all means, if you have the capability to produce this part of the turn signal, make it happen!


Dan

Wildguzzi.com

Re: alternative 98 EV turn signals
« Reply #3 on: October 15, 2022, 09:02:33 AM »

Offline Wayne Orwig

  • Gaggle Hero
  • *****
  • Posts: 13908
    • Hog Mountain weather
  • Location: Hog Mountain
Re: alternative 98 EV turn signals
« Reply #4 on: October 15, 2022, 09:45:09 AM »
This issue has been discussed number times in the past. Someone else suggested making the rubber part that always deteriorate, maybe out of a more durable material.
I’ve monkey rigged all four of mine on my 2002 Stone.
Please Wayne, by all means, if you have the capability to produce this part of the turn signal, make it happen!

My plan is to make a fairly simple rigid internal metal piece, with a cheap cosmetic plastic cover.
But now that I am retired, I never have time to work on anything like this.  :rolleyes:
Scientist have discovered that people will believe anything, if you first say "Scientists have discovered...."

Offline bigbikerrick

  • Gaggle Hero
  • *****
  • Posts: 5848
  • 73 Eldo, 98 V 11 ,12 Ural Gear Up, 76 Convert,
  • Location: Southeastern corner of Arizona, right next to "Old Mexico, and New Mexico"
Re: alternative 98 EV turn signals
« Reply #5 on: October 15, 2022, 03:02:50 PM »
I replaced the turn signal assemblies on a 2003 Cali Aluminum I used to own, with aftermarket ( Emgo, I think) turn signals meant for a Kawasaki Vulcan. The shape was very similar to the Oem Guzzi ones, and they mounted up with one bolt. I just had to make a small aluminum adapter plate with a hole in the center, to mount them up.

https://www.ebay.com/itm/314156317947?epid=171234366&hash=item49252cfcfb:g:MOIAAOSwsNhjKyiu&amdata=enc%3AAQAHAAAAsNj49z%2FfwxXv9fBDatKjUtndyPTmME6sInadZtsSEYQPMU%2B4GbRFsJ0kul5cQ%2BcMUsdZMGS2pNLGN%2BHZFJKkjGNTRpCfRqZu7GFmUnJGTxir5nmaflWeX3SGSq1SM%2BFlVnsMx48CRVcgR1EZJmWSf6sxrz319C%2Fbzrm7DAhPb14ioY8IpjjrDhUVaH0QJB59ql%2BTeQANrk2oIxcTjTv9P5TA1hfX3sP5MxG24Asy3lsq%7Ctkp%3ABk9SR5LVhdT7YA
Rick.
« Last Edit: October 15, 2022, 03:07:00 PM by bigbikerrick »
"You meet the most interesting people on a Guzzi"

Offline flower_king001

  • Gaggle Mentor
  • ****
  • *
  • Posts: 929
  • Location: South/Middle/TN
Re: alternative 98 EV turn signals
« Reply #6 on: October 16, 2022, 07:36:59 AM »
This issue has been discussed number times in the past. Someone else suggested making the rubber part that always deteriorate, maybe out of a more durable material.
I’ve monkey rigged all four of mine on my 2002 Stone.
Please Wayne, by all means, if you have the capability to produce this part of the turn signal, make it happen!


Dan

Yes, this issue has been discussed numerous times in the past and here we are again.

If anyone creates the STL files I have access to 100+ 3D printers that can produce parts in various materials including SLS/SLS/DLP and a few others....more than willing to help.
Current Fleet

1971 BMW R90/5
1986 Moto Guzzi Lemans IV 1000
1998 Moto Guzzi 1100 EV
2005 BMW 1200 RT
2007 BMW 1200 GS
2007 Moto Guzzi Breva 1100

Online kidsmoke

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • Posts: 1386
  • It's never too late to be what you might have been
Re: alternative 98 EV turn signals
« Reply #7 on: October 17, 2022, 03:19:11 PM »
Jackal with 3D printed custom standoffs to blend the stalk radius. Metal housings on the directionals...





« Last Edit: October 17, 2022, 03:20:40 PM by kidsmoke »
'79 G5
'93 1000S
'00 Jackal
'09 GRiSO

Offline Iron Cross Junction

  • Gosling
  • ***
  • *
  • Posts: 222
  • Location: Just above Pott's Camp along Braddock's route, Va.
Re: alternative 98 EV turn signals
« Reply #8 on: October 17, 2022, 08:44:54 PM »


I do not understand the fuss about this.

My approach -- while admittedly a bit inelegant for the effete  :rolleyes: -- has worked just fine.   













Soon, you’ll tell me that suspenders no longer meet the dress code at rallies.   :shocked:

Bill

P.S.  Not sure which pix, above, caused the lapover for this thread, but maybe the mods can reduce those. 

Don't think it's from mine, but if so, let me know and I or mods can reduce those.



Bill Hagan

Proud Member of Moto Guzzi's Envy-of-the-Industry Post-Sale R&D Program!

1998 V11 EV [98 EV]
2004 V11 Ballabio, Sold; sigh
2007 Norge [NORJ], Sold; sigh
2010 Griso [GRISO]
2016 Stornello [BEATA]
2017 V7 III [RADOŚĆ]

Offline Gusable

  • Gaggle Mentor
  • ****
  • Posts: 605
  • Location: McKinney texas
Re: alternative 98 EV turn signals
« Reply #9 on: October 17, 2022, 11:29:18 PM »
My 94 cali appears to have the same signals. They feel “loose” a little bit ( just like my 98ev) and I saw some tiny cracks. I coated the entire black stalk with 2 part clear epoxy to strengthen it and then shot it with a spritz of black rubber undercoating.  Looks great. Maybe it will give me some more time.
1994 California 1100

Offline larrys

  • Gaggle Hero
  • *****
  • Posts: 1425
  • Location: SE CT
Re: alternative 98 EV turn signals
« Reply #10 on: October 19, 2022, 07:50:12 AM »
My Cal turn signals have started to degrade. I put the front stalks on the back to bring in the turn signals, and shortened the rear stalks to about an inch long and put them on the front. When they crap out completely(not if) I will be looking for an alternative.
Larry
'13 Monster 1100 EVO
'95 Cal 1100
'68 Bonneville

MGNOC 7248

Online pehayes

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 4570
    • Falcone Touring
Re: alternative 98 EV turn signals
« Reply #11 on: October 19, 2022, 12:50:15 PM »
It is basically a faulty design.  Not up to the task.  The stalk, although it looks like rubber, is not flexible.  Instead of dampening vibration loads, it merely transfers those loads.

The stalk is held in place by a single Allen screw at one end and a 'hook' of metal at the other which is bent at a 90 degree or "L" angle.  When new, these two components held the stalk firmly in place on the bike.  Over time and road vibration, the 'hook' is not strong enough and gradually begins to bend open.  Thus, that side of the stalk is no longer secure and the full load is transferred to the Allen screw and its threaded receiver.

The cure is to remove the stalk and rap on the 'hook' with enough hammer force to bend it back to its original, 90 degree angle.

Over time it happens again.  Rinse and repeat.  YMMV.

Patrick Hayes
Fremont CA




Offline Wayne Orwig

  • Gaggle Hero
  • *****
  • Posts: 13908
    • Hog Mountain weather
  • Location: Hog Mountain
Re: alternative 98 EV turn signals
« Reply #12 on: October 20, 2022, 09:50:20 AM »
The cure is to remove the stalk and rap on the 'hook' with enough hammer force to bend it back to its original, 90 degree angle.

On my 94 California 1100, they rubber held up and the hook bent as you show,
On my 2004 EV, the rubber has turned to dust. Nearly. As in even JB Weld can't patch it up too well.
Scientist have discovered that people will believe anything, if you first say "Scientists have discovered...."

Online Ncdan

  • Global Moderator
  • Gaggle Hero
  • *
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 5878
Re: alternative 98 EV turn signals
« Reply #13 on: October 20, 2022, 11:46:56 AM »
On my 94 California 1100, they rubber held up and the hook bent as you show,
On my 2004 EV, the rubber has turned to dust. Nearly. As in even JB Weld can't patch it up too well.
As mine did, the rubber compound turns to a crumbling solid.
If someone with the capability to use a 3D printer and duplicate the rubber part with a solid nylon material, I’m thinking that would be a permanent fix.
I definitely don’t know the facts about the printer thing, I’m just speculating as to an acceptable fix.

Online kidsmoke

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • Posts: 1386
  • It's never too late to be what you might have been
Re: alternative 98 EV turn signals
« Reply #14 on: October 20, 2022, 02:14:23 PM »
As mine did, the rubber compound turns to a crumbling solid.
If someone with the capability to use a 3D printer and duplicate the rubber part with a solid nylon material, I’m thinking that would be a permanent fix.
I definitely don’t know the facts about the printer thing, I’m just speculating as to an acceptable fix.

The Indiana contingent is taking a stab at this. Will update when/if successful
'79 G5
'93 1000S
'00 Jackal
'09 GRiSO

Online pehayes

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 4570
    • Falcone Touring
Re: alternative 98 EV turn signals
« Reply #15 on: October 20, 2022, 09:59:02 PM »
3D printing should work nicely.  However, that embedded 90 degree hook is a different story.  :-(  Kudos to anyone who solves both simultaneously.

Patrick Hayes
Fremont CA

Online Ncdan

  • Global Moderator
  • Gaggle Hero
  • *
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 5878
Re: alternative 98 EV turn signals
« Reply #16 on: October 21, 2022, 07:42:32 AM »
3D printing should work nicely.  However, that embedded 90 degree hook is a different story.  :-(  Kudos to anyone who solves both simultaneously.

Patrick Hayes
Fremont CA
I don’t think the hook is a must. I obtained one that didn’t have the hook.
I applied a little epoxy and snugged the Allen head bolt down good and it’s held fine for the past year👍

Offline LaMojo

  • New Egg
  • *
  • Posts: 73
  • Location: Rayville, La
Re: alternative 98 EV turn signals
« Reply #17 on: October 21, 2022, 08:29:45 PM »
Some Buells use a similar but more flexible stem.

Used those on my Quota. Wiring was a little different but I used the Old ones spliced in.

Offline Wayne Orwig

  • Gaggle Hero
  • *****
  • Posts: 13908
    • Hog Mountain weather
  • Location: Hog Mountain
Re: alternative 98 EV turn signals
« Reply #18 on: November 16, 2022, 05:18:53 PM »
First step to printed parts.





Scientist have discovered that people will believe anything, if you first say "Scientists have discovered...."

Online Ncdan

  • Global Moderator
  • Gaggle Hero
  • *
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 5878
Re: alternative 98 EV turn signals
« Reply #19 on: November 16, 2022, 06:56:48 PM »
First step to printed parts.




Nice! When you get ready to release them to the members for sale, just let us know and put them in the swap meet.
I’ll take two right as soon as they are ready for release.

Offline flower_king001

  • Gaggle Mentor
  • ****
  • *
  • Posts: 929
  • Location: South/Middle/TN
Re: alternative 98 EV turn signals
« Reply #20 on: November 17, 2022, 05:26:40 PM »
First step to printed parts.





I sent a PM...thanks
Current Fleet

1971 BMW R90/5
1986 Moto Guzzi Lemans IV 1000
1998 Moto Guzzi 1100 EV
2005 BMW 1200 RT
2007 BMW 1200 GS
2007 Moto Guzzi Breva 1100

Offline adaven

  • 2024 Board Donor
  • Hatchling
  • *
  • *
  • *
  • *
  • *
  • Posts: 191
  • Location: Madison, Wi
Re: alternative 98 EV turn signals
« Reply #21 on: November 19, 2022, 11:43:44 AM »
I’ll take two right as soon as they are ready for release.
So will I

Offline Gusable

  • Gaggle Mentor
  • ****
  • Posts: 605
  • Location: McKinney texas
Re: alternative 98 EV turn signals
« Reply #22 on: November 19, 2022, 12:22:13 PM »
I’ll take a set as well!
1994 California 1100

Offline Wayne Orwig

  • Gaggle Hero
  • *****
  • Posts: 13908
    • Hog Mountain weather
  • Location: Hog Mountain
Re: alternative 98 EV turn signals
« Reply #23 on: November 21, 2022, 03:16:53 PM »
I think it needs a label.
If I knew how I would put on the eagle.
 :evil:





Scientist have discovered that people will believe anything, if you first say "Scientists have discovered...."

Online Ncdan

  • Global Moderator
  • Gaggle Hero
  • *
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 5878
Re: alternative 98 EV turn signals
« Reply #24 on: November 22, 2022, 04:44:28 PM »
I think it needs a label.
If I knew how I would put on the eagle.
 :evil:




Is that the finished product Wayne?
If so will they be going in the Swap Meet Section available for members to purchase soon?
I’ll be willing to receive a free set for experimental evaluation purposes🤔😂😂😂
Just kidding Sir. 👍

Offline Wayne Orwig

  • Gaggle Hero
  • *****
  • Posts: 13908
    • Hog Mountain weather
  • Location: Hog Mountain
Re: alternative 98 EV turn signals
« Reply #25 on: November 22, 2022, 05:32:26 PM »
Is that the finished product Wayne?
If so will they be going in the Swap Meet Section available for members to purchase soon?
I’ll be willing to receive a free set for experimental evaluation purposes🤔😂😂😂
Just kidding Sir. 👍

I'm not sure how I will manage it. But I am not in the game to make a profit. But of course, beer money is always good.  :evil:  I'm looking into it.

I still have a few glitches to work out.
I think I got a good eagle logo too.

This is the latest version.





Scientist have discovered that people will believe anything, if you first say "Scientists have discovered...."

Offline LowRyter

  • Gaggle Hero
  • *****
  • *
  • *
  • Posts: 16685
  • Location: Edmond OK
Re: alternative 98 EV turn signals
« Reply #26 on: November 22, 2022, 05:38:10 PM »
 :thumb:
John L 
When life gets you down remember it's one down and the rest are up.  (1-N-23456)

Online Ncdan

  • Global Moderator
  • Gaggle Hero
  • *
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 5878
Re: alternative 98 EV turn signals
« Reply #27 on: November 22, 2022, 05:58:35 PM »
I'm not sure how I will manage it. But I am not in the game to make a profit. But of course, beer money is always good.  :evil:  I'm looking into it.

I still have a few glitches to work out.
I think I got a good eagle logo too.

This is the latest version.




You’re the man Wayne👍

Offline adaven

  • 2024 Board Donor
  • Hatchling
  • *
  • *
  • *
  • *
  • *
  • Posts: 191
  • Location: Madison, Wi
Re: alternative 98 EV turn signals
« Reply #28 on: November 22, 2022, 07:13:59 PM »
The eagle is a great touch

Offline Wayne Orwig

  • Gaggle Hero
  • *****
  • Posts: 13908
    • Hog Mountain weather
  • Location: Hog Mountain
Re: alternative 98 EV turn signals
« Reply #29 on: November 23, 2022, 05:34:15 PM »
First prototype installed.
These have a modified base to let them clear the fairing, which I have wanted for years.



Scientist have discovered that people will believe anything, if you first say "Scientists have discovered...."

 

20 Ounce Stainless Steel Double Insulated Tumbler
Buy a quality tumbler and support the forum at the same time!
Better than a YETI! BPA and Lead free.
Advertise Here