New 20 ounce tumblers available now! Forum donation credit with purchase. https://www.wildguzzi.com/Products/products.htm#Tumbler
I can use GuzziDiag just fine, not that I've done anything with it.It's using the reader bit that's a real problem because I want to save my original before doing anything else.I've only managed to get it to save my original bin file once, then it hasn't actually saved it because it's certainly not where I saved it to, even tho it took the obligatory 15 minutes to download it.But every other time it comes up with 'Initialization Failed'. Turn ignition off for 10 seconds - then nothing.It's obviously setup OK otherwise Guzzidiag wouldn't respond and couldn't have (apparently) saved my bin file., and I'm pretty good with the whole Windows thing.So, what's the problem people?>?ThanksLarry
Are you selecting the right com. Port before starting 'Reader'? I too couldn't find where my maps were being sent to. Turned out it was somewhere else entirely, can't remember where offhand! I'll have to look when I'm at the workshop.Pete
OK folks. We can all rest easy.Managed to get it to save the old bin file - finally. Turned off firewall and virus scanner, altho who knows if that made the difference because it still took 1/2 a dozen attempts to even get it connected.Then coxed it into uploading a new one. Took a few efforts to get it to behave with a couple of 'Sorry, something's gone wrong' messages.But it's all good now. Reset the TPS.Seems to be a lot easier off the mark, no jerky/surgy stuff.I'm a happy Stelvio rider.Thanks Pete and Paul.See you Thursday arvo Pete.Larry
Paul and his Mate, (Who I can't work out what his name really is?!) who do the whole Guzzidiag shit who need the Golden Fairy treatment
his Mate, (Who I can't work out what his name really is?!)
you can try the titanium map
I did a basic TunerPro 'Howto' on the Griso Ghetto CLICKY.I can post it here on WG if peeps want.
Please do!
Here Here 'tis. CLICKYIt's long.
CAUTIONDON'T accidentally connect the Pos red and Neg Black cables arse about face or the Smoke Will come out of the OBD2 cable chips. For my next trick......... A dedicated 2 pin keyed plug so old Ten Thumbs here can't do this again
Also open up the thing with the led, look what is written on the chips, if you have a 232rl in it. sometimes you don't get an 232rl but a cheaper less capable ftdi chip.Or the adapter cable is wrong made, we ghad that before. there are connection pictures earlier in this thread I think
We can already connect our 5AM ecu's to a smart phone via the ScanM5X app. and pretty good it is too.https://play.google.com/store/apps/details?id=scantwin.scanmM5.AllinOne&hl=en
1. The 5AM expects a narrowband Rich/Stoic/Lean signal only. You must program an analog output to emulate a narrowband signal, but you can still choose your target AFR as your 'Stoic' point.