New 20 ounce tumblers available now! Forum donation credit with purchase. https://www.wildguzzi.com/Products/products.htm#Tumbler
Reflashing a map might cure it. I've cured a few high idle issues by reflashing. You never know....12,000 differences? I have been a busy boy, haven't I?
What is the TPS saying its at now? If you haven't re-set it and it's not at 4.8, (Or very close. Like + or- .2) then someone may of fiddled with a stop screw or the linkage rod.Pete
Hi, I got my cables from lonelec, and I let it install the drivers... The start of this post says don't. What's the best way to remove them or shall I just download the ones from the link and see if they overwrite and work ok?
Secondly, how do I know what ecu I have, a 5eu or one of the following - 15M/15P/15RC It for a 2016 v7 special ii
Is reflashing as simple as taking a copy of what's on the bike using IAWxxReader and then putting it back on using IAWxxWriter or is there something more to it?.... and yes you have been
From looking at all the screws on the TB's it looks to me like none have been messed with. No cracks in the sacred yellow paint
I suppose you could do that, but I always overwrite it from a copy on my PC. Just in case.
What about the linkage rod?
Are you using the 'Writer' programme or just connecting the Guzzidiag diagnostic one?
When you are uploading a map it clears the memory and that's when you get the unplugged symbol. Can't remember if you get it when you're reading but it isn't clearing the memory when you are.