New 20 ounce tumblers available now! Forum donation credit with purchase. https://www.wildguzzi.com/Products/products.htm#Tumbler
SUCCESS!!! Finally got my Mac to connect with my Norge. Had to disable the Mac driver and she connected right away! Thanks for all your input, now I just need a map.I synced the throttle bodies but I'm having some trouble. Followed the instructions exactly as it says and got everything in sync, took the bike for a ride and seemed to be running hotter than normal. I rechecked the sync and now it's way off, redid it, took for a ride and now it's way off again. Anybody have a clue? I'm using a Carbmate and a Twinmax and getting the same result with both. Also connected to Guzzidiag and the temp was at 125c!
Have you removed the charcoal canister? If so you'll have to block the vacuum pipe that went from the canister to the manifolds.Pete
Well then the driver you did install is to old, as I wrote, now OSX does have an ftdi driver in the kernel. Thats from maverics:https://developer.apple.com/library/mac/technotes/tn2315/_index.html
A couple of days ago I posted in the Stelvio thread over on the ADV forum about the logging work I did making the map for my 2 Lambda Stelvio.
Can you post a link please - logging is SO important to me.
http://advrider.com/forums/showpost.php?p=26723585&postcount=12936
Punch, this topic is about getting guzzidiag up and running, maybe open an own topic with questions about logging?
I don't know if the map version you got is the same as mine but while I do notice very minor snatchiness with it (not noticed with the stock map, go figure) I've kept running it, no fumes, smells or anything else like that.With the stock map, the Norge was smooth up from idle, just felt like the rev wasn't as eager so I used more throttle to move things along. The fuel economy was good as well.Maybe the stock maps changed between your model year and mine (2013 vs your?)