New 20 ounce tumblers available now! Forum donation credit with purchase. https://www.wildguzzi.com/Products/products.htm#Tumbler
It's amazing to me that any of these parts are still available !I'm guessing that you need to be a good detective.
Glad to hear it did start. As far as starting mannersÖ. My singles have generally been good to start at approx the correct settings. But some benefitted from minor tweaks. If itís kicking back hard, the timing could be slightly advanced. Before you change timing, some minor kickback is probably normal. Even if the process is generally similar, It seems like each single has its own individual starting procedure and will not tolerate anything else.But you may have a carb or condition (like only starting on full throttle, then stalling) thatís rich , which promptly fouled the plug so that now it will not spark hot enough or at all to function. Even if they were the same heat range, gap, etc, Some plug brands always seem to work more reliably in my old single bikes than others. Iíve got a coffee can with several brands, including some pink Lodge plugs that always seem to save the day. If you havenít swapped a plug (new plug, burned dry with torch or bead blasted) yet, I would give that a try first before I started changing anything else.
I steer clear of Champions since they seem to damage the threads in alloy heads too easily. I've had issues with NGKs - my V50 III would barely start and would only run on one cylinder with new, properly gapped BP7ES. Installed a pair of Denso W22EP-U and it started right up and ran perfectly. Runs even better with Denso IW22 (Iridium). This poor little Benelli is for sale near me. If I didn't already have five projects waiting. I'd think about buying it.
Page created in 0.027 seconds with 25 queries.