General Category > General Discussion
V7 850 Sport purchase and upgrade observations
Rons:
I found that you can “reset” the riding modes by going into the menu ( only accessible when stopped) and selecting English. When you use the heated grips again, the riding modes will revert to Italian.
My riding modes have been English all Summer, but soon, they will be Italian again……..
Dr. Enzo Toma:
I tried the language change and it went exactly as you described. Thanks for the info!
Went to install the OEM accessory engine guards on the Sport today. Got the left one fitted and decided it wasn't to my liking. The Moto Guzzi guards (apparently made by Segis, per the stickers on them) are a bit lighter duty than the Hepco & Becker ones on my Stone, which means they look sleek on the bike, but the deal breaker for me is that they're sloped quite a bit on the top bar. I sometimes rest my feet up on the crash bars, due to a lack of highway pegs, and they wouldn't work for that. The SW Motech ones, as great as they look, also lack that feature for me, so I have ordered a set of Hepco & Becker guards.
"Highway bars" after a hike in Arches National Park last year on the V7 Stone.
Rons:
Once you use the heated grips. Modes go back to Italian. Call it “character “
DaSwami:
Thank you for directing me to this post. Please keep us updated from time to time as the bike breaks in and racks up miles.
Dr. Enzo Toma:
My V7 Stone sold, so unfortunately I no longer have that for comparison, but on the upside it seems to have gone to a good home around Denver and the new owner is housemates with a V85 owner.
Some new parts installed on my V7 Sport:
OEM Moto Guzzi Tank Pads 2S002375 - these are the updated pattern that matches the panel styling on the V7 Sport. On their own, I don't like them as much as the older design, but they're what matches the Sport so I went with them and that more modern styling may grow on me. Hard to compete with the looks of the Centenario IMO. I don't feel that I aggressively hug the tank of the V7 with my knees during regular riding, but I do find these pads useful when standing up on the bike for a stretch, to reduce scratching and scuffing from throwing a boot over or from my riding pants, and they kind of break up the solid tank pattern. Still had someone ask if the bike was a Kawasaki though because of the vibrant green!
SW Motech 1 inch Sweep Back Bar Riser Set - I also had these on the Stone and liked that they reduced the strain of my reach for the bars on long rides
OEM Moto Guzzi Touring Screen - I gave the Isotta tall windscreen a good try, but it caused too much buffeting at helmet level for me. The OEM screen is better but in no way great, unfortunately I think the compromise of a great windscreen for me would just be a barn door.
And finally, I got the V7 Stone parts I ordered to convert the bike over to standard stalk mirrors. It required replacing the clutch lever assembly which was not hard work to do, but more involved than it needed to be if the assembly would have just had a 2-piece clamp setup like on the older V7s. I suspect the actual part's design decision was made by Brembo and not Piaggio/Moto Guzzi though.
I had to strip everything off the left side of the bar to slide it off. The left switch assembly required I buy some torx t-handles as a torx bit shouldered itself reaching into the plastic housing before the tip of the bit could reach the screw. I was happy to find out that the left switch assembly (and presumably the right) don't depend on alignment pins and holes drilled in the handlebars, which means with the right tools it's easy to rotate them to your liking on the bar - which I wanted to do since I installed the bar back risers and moved things around. The factory handlebars do have little chamfered divots drilled into them to help locate things, I also marked where things were with painter's tape.
The blocky switch assemblies on the newer model are hopefully more reliable than the older ones, especially the ignition switch where my Stone had frequent issues but the Sport hasn't yet *knock on wood*, but I do have to say that the left side assembly's turn signal switch is the furthest I've ever had to reach for a turn signal on a bike. I typically wear a size "Large" glove here in the USA, and I find myself taking my palm off the grip only leaving my finger tips in place to reach my thumb over to operate the turn signal. This was very awkward at first, made slightly less awkward by rotating the switch assembly location, but I'm still getting used to it.
The clutch lever has a switch on it to signal when the clutch lever is pulled in, and accessing the wiring for that required lifting the fuel tank. Some advice for anyone doing the same thing on theirs, use the old thru-frame zip-tie to fish a new one through! I cut and remove the old one and then had a pinky finger war fishing a new one through the frame.
Clutch adjustment after fitting everything back together was easy peasy, it may not be as slick as a hydraulic clutch but at least the adjusters on these bikes are very easy to access and work at both ends of the cable. The owner's manual calls for a 2mm gap of free clutch-play, my bike was probably delivered with 5 or 6mm, I used 2 nickels in the gap to dial it in at ~4mm and found that to be to my liking.
I carried over the Italian FAR brand folding mirrors I had taken off the Stone before selling it. They have over 25k miles on them but still adjust and hold their position fine. With eliminating the bar-end mirrors and running the Stone bar ends, I think my luggage is now the widest part of the bike again, just slightly wider than the bar ends though at a different height. What's most important for me is that I gained a few inches of safe margin for lane filtering, and I have mirrors that I don't constantly need to re-adjust from bumping them mounting the bike with the steering full-left, or from setting a helmet on the right one, like I did with the factory bar-end mirrors.
I'd say the bike is now mostly sorted out to my liking, other than the seat. I ordered an OEM comfort seat and will give it a try, if it's no good then I'll have a local shop use its seat pan to build something else. Again I'll note that the E5+ bikes have a different seat fitment than prior generations, so unfortunately the only options I see on the market right now are the OEM ones.
The rear brake on the Sport is just as terrible as on my Stone. The front obviously has more stopping power, but the rear is just enough to hold the bike still on a hill. I challenged myself to do a few traffic light stops with the rear brake only, and even after it should be all bedded in, it was quite nerve racking. I'll likely try different brake pads again at some point, though I don't think they're the bulk of the problem just like they weren't on my Stone when I ran EBC pads.
Pyramid make a stick-on fender extender that I installed on my Stone and liked for reducing rain splash on myself and the front of the engine, unfortunately that does not fit the V7 Sport's different front fender with the upside-down forks. They do make a large "extenda fenda EXTRA" for the Sport, but the bracket is an eyesore to me so I wasn't sold on it.
On a different note, I found some Arm & Hammer odor eliminators at the store that drop right into my riding boots to keep them dry and from developing a funk. I fished some nylon string through them and now they're easy to retrieve out of the boots before a ride as well.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version