Wildguzzi.com
General Category => General Discussion => Topic started by: 1969katanaman on March 11, 2022, 06:12:49 PM
-
What symptoms would i see if one of my lambdas was not working. I have not thrown any faults but when mucking around with guzzi diag on the stelvio I noticed lambda 2 shows no Mv?
-
What symptoms would i see if one of my lambdas was not working. I have not thrown any faults but when mucking around with guzzi diag on the stelvio I noticed lambda 2 shows no Mv?
If you are running a closed loop map (OE, for one) it'll run poorly in the sub-4,000rpm range. Poor throttle response, surging/hesitating, etc. Above 4,000 the lambdas are ignored.