New 20 ounce tumblers available now! Forum donation credit with purchase. https://www.wildguzzi.com/Products/products.htm#Tumbler
Can someone rattle off the specs on the tonti frame bolts from the top of their head? These are for the junction between the downtubes and the lower frame rails? My bike had engine guards installed, and now that they are removed, I'm finding that the bolts are too long. The ones I have are shouldered so I cant just cut them down.I am guessing socket cap head M12x40mmx 1.25pitchAnd I think stainless is fine here with a dot of locktite?Does that sound right?
www.boltdepot.com is your friend. No minimum order, wide selection of sizes and grades.
The part number 98613630 is from the CX100 fiche:
Same with Belmetric. The last two digits of the part number denote the length in millimeters.
Hey Chad. I’ve found that the black finished fine thread bolts from the hardware store rust pretty quickly. It looks like Harpers has the Guzzi ones, which might or might not be better. https://www.harpermoto.com/screw-98613630.html The part number 98613630 is from the CX100 fiche:Ben