Author Topic: Dellorto phf vs phm  (Read 9861 times)

crc

  • Guest
Dellorto phf vs phm
« on: January 02, 2015, 10:50:17 PM »
whats the difference in them? I think I knew once but its slipped my mind at the moment. has anyone here put phf32s on a round barrel? I bought some phf32s a few months intending to use them on my eldo, but haven't mocked my engine up yet to see how they will fit. I think theyre off a ducati bevel so fit on a spigot like the vhb guzzi carbs. the reason I ask about phms is that some phm40s have come up for sale at a good price, they'll be no good on my eldo but I do like collecting stuff that I may use oneday

Offline guzzista

  • Gaggle Hero
  • *****
  • Posts: 1060
  • Location: SF Bay Area
Re: Dellorto phf vs phm
« Reply #1 on: January 03, 2015, 04:29:34 AM »
PHF's are (were) available from 30 to 36 mm, both with female ( external clamp) and male  fitting (as on Guzzi LM's.) PHM go from 38 to 40mm, fitting options same  as PHF.  The choke ( enrichener ) is a bit different on the PHM ( bolted to the side ) . Some PHM's had no enricheners and accell pumps were blanked off with a plate
1975 750S Tribute bike, 1994 Cali 1100, 2007 Ducati GT1000, 1983 SP1000, 1973 V7Sport project, 2017 California1400 Touring

Offline guzzisteve

  • Gaggle Hero
  • *****
  • Posts: 12152
  • "Just Ride It"
Re: Dellorto phf vs phm
« Reply #2 on: January 03, 2015, 08:36:46 AM »
I have PHF 32's(non bevel Duc)  on my Cali2, just the 2mm difference was like I put on FI.

My daily rider V700 came to me w/PHF32 Bevel Duc carbs on it. The slides are different than current made PHF's, and you may not be able to find a /60 cut on a set of used ones. I have a pair but useless if you can't get parts(slides). The idle ramp is wrong if I remember, bike won't idle down w/newer slides.
"Pray through Carlo & your bike shall be healed"
Location: Planet Earth

Offline jacksonracingcomau

  • Gaggle Hero
  • *****
  • Posts: 2389
Re: Dellorto phf vs phm
« Reply #3 on: January 03, 2015, 07:06:43 PM »
I have PHF 32's(non bevel Duc)  on my Cali2, just the 2mm difference was like I put on FI.

My daily rider V700 came to me w/PHF32 Bevel Duc carbs on it. The slides are different than current made PHF's, and you may not be able to find a /60 cut on a set of used ones. I have a pair but useless if you can't get parts(slides). The idle ramp is wrong if I remember, bike won't idle down w/newer slides.

New slides can be modded to fit, see
http://www.dellorto.co.uk/merchandise/products_details.asp?PartNo=11570&CategoryID=2&PartsectionID=21

Other difference PHM to PHF is grooves for rubbers (on male spigot), 2 grooves or 1 groove, not relevant to Duc style bolt up but if making spigot to rubber mount, get rubbers first

Offline guzzisteve

  • Gaggle Hero
  • *****
  • Posts: 12152
  • "Just Ride It"
Re: Dellorto phf vs phm
« Reply #4 on: January 03, 2015, 07:58:00 PM »
Thanks for the info, that's great. Set them up in 92.
"Pray through Carlo & your bike shall be healed"
Location: Planet Earth

***Wildguzzi Official Logo High Quality 5 Color Window Decals Back In Stock***
Shipping in USA Only. Awesome quality. Back by popular demand. All proceeds go back into the forum.
Best quality vinyl available today. Easy application.
Advertise Here
 

20 Ounce Stainless Steel Double Insulated Tumbler
Buy a quality tumbler and support the forum at the same time!
Better than a YETI! BPA and Lead free.
Advertise Here