Author Topic: Norge Throttle Return Spring  (Read 3849 times)

Offline smdl

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 1321
  • Location: Courtenay, BC
Norge Throttle Return Spring
« on: January 24, 2015, 04:59:05 PM »
Hi, Folks.

My 2007 Norge seems to have a rather lazy return spring on the throttle.  Basically, when cranked, the throttle will not automatically return to the closed position.  I'm not overly concerned about this as there are two cables (open/close), and I know I can make the throttle bodies close, but this could be a problem getting the provincial safety approval.  I currently have the air box out, so am checking to make sure that the cables look okay (they do), and that the linkage at the TBs works as it should (seems to).  However, I couldn't help noticing that there doesn't seem to be any external throttle return spring on this setup.  I assume that the TBs must have internal springs?  The parts diagrams don't shed any light on this, as there are no springs listed or shown, that I can detect.

Assuming that I am correct, and that there are no missing springs, does anyone have any recommendations as to how the mechanism can be made to operate normally?  I and planning to do a cable lube, and assume that might help a bit, and have already cleaned the TBs as well as I can without removing them.  Anything else?

Edit:  The throttle (grip) seems to turn with little effort, so I don't think that is the source of the problem.

Thanks,
Shaun
« Last Edit: January 24, 2015, 05:15:27 PM by smdl »
'74 Eldorado Civilian
'17 V7 III Stone
'21 Aprilia Tuono 660
'22 V85TT Guardia D'Onore
'22 V85TT Guardia D'Onore (Yep, two)

Offline Kiwi Dave

  • Gaggle Hero
  • *****
  • *
  • Posts: 1421
    • Guzzi Gander Ltd
  • Location: Auckland, New Zealand
Re: Norge Throttle Return Spring
« Reply #1 on: January 25, 2015, 01:44:38 AM »
Can you close them with your hand pushing on the mechanism at the throttle bodies?

Sounds like it might be a stepper motor issue instead.

Vasco DG

  • Guest
Re: Norge Throttle Return Spring
« Reply #2 on: January 25, 2015, 02:59:08 AM »
Sounds mechanical to me. Cables or twistgrip? Disconnect the cables at the throttlebody and see if it snaps back ok. That will rule out spring.

Pete

Offline smdl

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 1321
  • Location: Courtenay, BC
Re: Norge Throttle Return Spring
« Reply #3 on: January 25, 2015, 09:33:10 PM »
Can you close them with your hand pushing on the mechanism at the throttle bodies?

Sounds like it might be a stepper motor issue instead.

Hi, Dave.

They actually close just fine by twisting the throttle closed, so I don't think the stepper.   Also it is the same with bike running or not.  Will have a closer look, though.

Thanks,
Shaun
'74 Eldorado Civilian
'17 V7 III Stone
'21 Aprilia Tuono 660
'22 V85TT Guardia D'Onore
'22 V85TT Guardia D'Onore (Yep, two)

Wildguzzi.com

Re: Norge Throttle Return Spring
« Reply #3 on: January 25, 2015, 09:33:10 PM »

Offline smdl

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 1321
  • Location: Courtenay, BC
Re: Norge Throttle Return Spring
« Reply #4 on: January 25, 2015, 09:34:25 PM »
Sounds mechanical to me. Cables or twistgrip? Disconnect the cables at the throttlebody and see if it snaps back ok. That will rule out spring.

Pete

Good suggestion, Pete.   I'll give that a go.

Thanks,
Shaun
'74 Eldorado Civilian
'17 V7 III Stone
'21 Aprilia Tuono 660
'22 V85TT Guardia D'Onore
'22 V85TT Guardia D'Onore (Yep, two)

Offline nikwax

  • Gaggle Mentor
  • ****
  • Posts: 600
  • Location: Portland, Oregon
Re: Norge Throttle Return Spring
« Reply #5 on: January 26, 2015, 06:32:52 PM »
 ...and planning to do a cable lube, and assume that might help a bit...



local dealer lubed my throttle cables, and they failed within a couple of weeks. I believe that's not a good idea with modern cables.
2014 Ducati Multistrada GT
2011 Norge GT 8V "Otto Valvole" (gone after 32k miles)
2001 BMW R1150 GS (gone after 100,000 miles)

Offline smdl

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 1321
  • Location: Courtenay, BC
Re: Norge Throttle Return Spring
« Reply #6 on: January 26, 2015, 08:32:35 PM »

local dealer lubed my throttle cables, and they failed within a couple of weeks. I believe that's not a good idea with modern cables.

Hmm, I wonder if he used something that wasn't compatible?

Thanks,
Shaun
'74 Eldorado Civilian
'17 V7 III Stone
'21 Aprilia Tuono 660
'22 V85TT Guardia D'Onore
'22 V85TT Guardia D'Onore (Yep, two)

Offline nikwax

  • Gaggle Mentor
  • ****
  • Posts: 600
  • Location: Portland, Oregon
Re: Norge Throttle Return Spring
« Reply #7 on: January 26, 2015, 11:38:31 PM »
Hmm, I wonder if he used something that wasn't compatible?

Thanks,
Shaun


Lubricant. Not compatible with modern cables. Dirt and grit love it.
2014 Ducati Multistrada GT
2011 Norge GT 8V "Otto Valvole" (gone after 32k miles)
2001 BMW R1150 GS (gone after 100,000 miles)

***Wildguzzi Official Logo High Quality 5 Color Window Decals Back In Stock***
Shipping in USA Only. Awesome quality. Back by popular demand. All proceeds go back into the forum.
http://www.wildguzzi.com/Products/products.htm
Advertise Here
 

Quad Lock - The best GPS / phone mount system for your motorcycles, no damage to your cameras!!
Get a Wildguzzi discount of 10% off your order!
http://quadlock.refr.cc/luapmckeever
Advertise Here