Author Topic: Bearings for Convert front wheel with spokes  (Read 1006 times)

jwinwi

  • Guest
Bearings for Convert front wheel with spokes
« on: March 30, 2019, 12:16:34 PM »
Knocked the old bearings out of the aluminum carriers before noting the depth each bearing sat in its carrier... Seems to me that the RH bearing must be completely seated in the carrier so the circlip can be installed. BUT the LH bearing goes in just far enough so the top is flush with lip on the carrier, right? Thanks in advance.


Offline Antietam Classic Cycle

  • Gaggle Hero
  • *****
  • *
  • Posts: 14141
  • Happily stuck in the past.
    • Antietam Classic Cycle
  • Location: Rohrersville, Maryland
Re: Bearings for Convert front wheel with spokes
« Reply #1 on: March 30, 2019, 12:48:08 PM »
Yes, one bearing "floats".
Charlie

jwinwi

  • Guest
Re: Bearings for Convert front wheel with spokes
« Reply #2 on: March 30, 2019, 12:55:57 PM »
Yes, one bearing "floats".
Thank you Charlie! Tried to put the carriers and bearing spacer back on the wheel but the spacer seems too long... Bearings were removed in the fall.

***Wildguzzi Official Logo High Quality 5 Color Window Decals Back In Stock***
Shipping in USA Only. Awesome quality. Back by popular demand. All proceeds go back into the forum.
http://www.wildguzzi.com/Products/products.htm
Advertise Here
 

Quad Lock - The best GPS / phone mount system for your motorcycles, no damage to your cameras!!
Get a Wildguzzi discount of 10% off your order!
http://quadlock.refr.cc/luapmckeever
Advertise Here