Wildguzzi.com

General Category => General Discussion => Topic started by: nbags on May 22, 2019, 08:12:40 AM

Title: v65 c carburator
Post by: nbags on May 22, 2019, 08:12:40 AM

trying to find a picture of this carb it is phbh 30 (us) model the atomized has a spring and a plunger  looking thing  this carbs were apart and i cant find picture of breakdown of this carb anywhere. thanks so much.

Title: Re: v65 c carburator
Post by: guzzisteve on May 22, 2019, 08:36:54 AM

Not to hard to find--  Parts & service manuals  ---http://www.guzzitek.org/gb/accueil_gb.htm

Large selection of DelOrto info here-----http://www.thisoldtractor.com/moto_guzzi.html

Title: Re: v65 c carburator
Post by: nbags on May 22, 2019, 08:50:20 AM

i have check neither
one has exact carb

Title: Re: v65 c carburator
Post by: Antietam Classic Cycle on May 22, 2019, 08:56:02 AM

The "spring and plunger looking thing" are parts of the accelerator pump, much the same as a VHB 29 or 30. 

Title: Re: v65 c carburator
Post by: guzzisteve on May 22, 2019, 01:21:44 PM

USA had the atomizer w/pump. In EU they had a different atomizer similar to PHF's and a main jet in the float bowl. I used to order those EU carbs to replace the USA set-up because you could get parts.

Title: Re: v65 c carburator
Post by: Antietam Classic Cycle on May 22, 2019, 02:57:00 PM

nbags - If you need to know how they go back together, it's pretty much the same as the VHB (except the slide is round of course  :wink:). Here's a helpful "how to": http://thisoldtractor.com/moto_guzzi_loopframe_carburetor_rebuild_-__vhb.html

Title: Re: v65 c carburator
Post by: nbags on May 22, 2019, 04:38:06 PM

thanks so much thats all i needed