General Category > General Discussion

69 Ambo , fork spring set / oil

(1/4) > >>

arveno:
HI All !

I would like to "stiff up " the front end of my ambo , i was wondering if anyone ever used these springs ?
are they worth the money ?
http://www.mgcycle.com/index.php?main_page=product_info&products_id=1147

Or should i just used a thicker fork oil ?

Thanks a lot for ,

Marco

JoeW:
I've never used those springs but, I have seen spacers placed on top of stock springs. You can use PVC, there's a union that fits perfectly. I'd send a picture but, I'm away from the shop for the next week. Hit your local building supply store, I'm sure you can find something.

guzzisteve:
I also cut spacers from the hard pvc, most likely around 3/8" thick, and use 20W fork oil. Make sure you grease the springs up too, just like factory did.

arveno:
Thanks guys , looks like the best idea and cheap too  :)

question: how do i pull those forks out of the triple three ?

I took the head light off, took the bolts that hold the fork cover off , for cover spit but if i pull down they dont move... i have manuals but it's not clear how to do it.
just asking before make any damage,thanks

John Ulrich:
I put those in mine.  Great ride!  I wish my Goldwing rode as smooth as the Ambo.

Navigation

[0] Message Index

[#] Next page