Author Topic: Help! Missing a caliper pin  (Read 164 times)

Offline berniebee

  • 2020 Board Donor
  • Weekend Warrior
  • *
  • *
  • Posts: 347
  • Location: Ottawa, Canada
Help! Missing a caliper pin
« on: July 20, 2021, 08:40:04 PM »
I'm rebuilding the brakes on my project '83 SP1000, and just realized that I'm missing the short pin in one of the calipers.

Does anyone have an extra? I don't care if it's rusty! 
In the pic below, it looks like the one on the left:



Online Antietam Classic Cycle

  • Guzzi Hero
  • *****
  • *
  • *
  • Posts: 12171
  • Happily stuck in the past.
    • Antietam Classic Cycle
  • Location: Rohrersville, Maryland
Re: Help! Missing a caliper pin
« Reply #1 on: July 20, 2021, 08:45:20 PM »
I have a few and can send you one.
Charlie
http://www.AntietamClassicCycle.com
'69 V700
'69 Ambassador
'71 Ambassador
'73 Eldorado
'74 850-T
'76 Convert
'77 Morini 3 1/2 Strada
'81 Ducati 500SL Pantah
'82 V50 III

Offline Scout63

  • Guzzi Mentor
  • ****
  • *
  • *
  • Posts: 864
  • Location: Orleans, MA USA
Re: Help! Missing a caliper pin
« Reply #2 on: July 20, 2021, 09:42:48 PM »
I just threw an old set of caliper pins in the trash can in the garage yesterday thinking they wouldn’t ever be needed.  I’m happy to dig the small pin out and mail it to you if Charlie doesn’t.
Ben Zehnder
Orleans, MA USA
1971 BMW R75/5
1972 Norton Commando Combat Interstate
1977 BMW R100S - on deck
1978 Yamaha SR500
1979 Moto Guzzi V1000G5 - current project
1980 Moto Guzzi v50ii

Offline berniebee

  • 2020 Board Donor
  • Weekend Warrior
  • *
  • *
  • Posts: 347
  • Location: Ottawa, Canada
Re: Help! Missing a caliper pin
« Reply #3 on: July 21, 2021, 08:49:29 AM »
I have a few and can send you one.

Thanks Charlie! PM sent.

Wildgoose Chase Moto Guzzi

Re: Help! Missing a caliper pin
« Reply #3 on: July 21, 2021, 08:49:29 AM »

Offline berniebee

  • 2020 Board Donor
  • Weekend Warrior
  • *
  • *
  • Posts: 347
  • Location: Ottawa, Canada
Re: Help! Missing a caliper pin
« Reply #4 on: July 21, 2021, 08:54:56 AM »
I just threw an old set of caliper pins in the trash can in the garage yesterday thinking they wouldn’t ever be needed.  I’m happy to dig the small pin out and mail it to you if Charlie doesn’t.
Much appreciated, but I PM'd Charlie, so I think I'm good.

 

20 Ounce Stainless Steel Double Insulated Tumbler with donation credit
Buy a quality tumbler and support the forum at the same time!
Better than a YETI! BPA and Lead free.
Advertise Here