Wildgoose Chase Moto Guzzi

General Category => General Discussion => Topic started by: mdhen on June 24, 2021, 09:29:03 AM

Title: clutch and brake pertches without mirror stems holes
Post by: mdhen on June 24, 2021, 09:29:03 AM
Hey does anyone know what some options would be for getting rid of the mirror holes on the perches on the v7iii? Either whole new perches that work with our bike or just the back section that the screw holes are on.
Title: Re: clutch and brake pertches without mirror stems holes
Post by: mdhen on June 24, 2021, 09:36:49 AM
I already have some covers, and I know I can flip them as well but would love to just get rid of them.

Also that is an absolutely outrageous price for those things.
Title: Re: clutch and brake pertches without mirror stems holes
Post by: Mayor_of_BBQ on June 24, 2021, 01:00:13 PM
I am pretty sure guzzitech or AF1 carry the blank clamp...  Someone was asking about this on reddit the other day. They do exist.
Title: Re: clutch and brake pertches without mirror stems holes
Post by: larrys on June 24, 2021, 01:56:56 PM
I run one mirror on the Cal. I filled the hole on the right with a short SS buttonhead Allen screw. Looks presentable. $94.50 for those two plugs is a ridiculous amount (Guzzi content).
Larry
Title: Re: clutch and brake pertches without mirror stems holes
Post by: mdhen on June 24, 2021, 03:55:37 PM
found what I needed here: https://www.oppracing.com/product_display/14429442-brembo-oe-spare-part-master-cylinder-brake-clamp-kit-black-110437220/

Title: Re: clutch and brake pertches without mirror stems holes
Post by: Perazzimx14 on June 24, 2021, 04:38:18 PM
I found black ABS plugs at the local home center handy for this type of thing. They range in size form about 3/16 to 2ish inch.


(https://i.ibb.co/3Cz6SNb/OP.jpg) (https://imgbb.com/)




Title: Re: clutch and brake pertches without mirror stems holes
Post by: mdhen on June 24, 2021, 05:58:56 PM
This is what my above link looks like:

(https://www.kettenmax.de/media/image/37/cc/29/brembo_110437220_600x600@2x.jpg)