1400 Lite Frame Recommendations

[Tourville]

Bought a 1300 mile 2014 California Custom Project Bike

Owner bought it new  - rode miles - stuck under a tarp & died..
I guess .. Widow put it out for sale ..

Tank interior rust it's a Total

The Bike is too massive for my 5'10 ..

Picked up a single side swing arm & Griso SE Final Drive Unit
& Rear Wire Wheel 5.5" .. light as possible

What's The Lightest Frame I can bolt all the parts onto ?


cHEERS!


Brian NY

[LowRyter]

you might contact Pete Roper on this board.  I believe that he's built a 1400 Griso. 

[blu guzz]

I am pretty sure that Jim Hamlin of Hamlin Cycles has created a 1400 hybrid.

[kingoffleece]

Hamlin did that but it took a LOT of custom fab work to get the motor in including making new mounts and creating new mounting taps in the block.  Not for the faint of heart.
It was a 1400 motor in a Breva frame if memory serves.

[fotoguzzi]

Hamlin did that but it took a LOT of custom fab work to get the motor in including making new mounts and creating new mounting taps in the block.  Not for the faint of heart.
It was a 1400 motor in a Breva frame if memory serves.

AKA rocketship 🙂

[Turin]

here is what you want...

https://www.guareschimoto.it/en/categoria-prodotto/gc-corse/

If i could afford it...

[John A]

here is what you want...

https://www.guareschimoto.it/en/categoria-prodotto/gc-corse/

If i could afford it...

Thanks 

[Mayor_of_BBQ]

here is what you want...

https://www.guareschimoto.it/en/categoria-prodotto/gc-corse/

If i could afford it...

They may very well sell you a frame...  You can get a more-or-less complete GSXR front end off ebay for under $600 (well, maybe not with the wheel)- but forks calipers & clamps