Author Topic: 1400 bar risers  (Read 1509 times)

Offline JohninVT

  • Guzzi Mentor
  • ****
  • Posts: 748
1400 bar risers
« on: April 16, 2019, 03:23:23 PM »
I need to raise my bars an inch.  Does anyone besides Todd sell bar risers?  TIA

pete roper

  • Guest
Re: 1400 bar risers
« Reply #1 on: April 17, 2019, 04:50:23 AM »
John? Will Onur's risers work? From memory the Cali 14 touring uses the same risers as Griso? If that is the case then Onur's will work.

Obviously different rides but I have risers on my Griso and they, along with dropped pegs, have allowed me to continue to ride long distances. Something that with the original bars and their rise was getting a bit marginal.

Can you post a pic of your current set up?

Pete

Offline DougG

  • Weekend Warrior
  • ***
  • *
  • *
  • *
  • Posts: 428
  • Location: Adirondack Mts., NY...Blue Ridge Mts., NC
Re: 1400 bar risers
« Reply #2 on: April 17, 2019, 10:13:30 AM »
Hi John,                                                                                                                         4-17-19

I got these for my Cali 1400.  They are from Fast by Ferracci.  However...even though F by F closed their doors about two years ago, but I got these last year.  Apparently they still had new stock, maybe they still do.  ALSO, They are pricey...$180.  They look great, work great for me and do not need any fancy cable work.  I think that 1" is the max rise before you have to re-rout or extend cables.  Good luck, DougG









A possum playing possum is no big deal.  Find one that can play giraffe, now you got yourself something!

Offline rocker59

  • Global Moderator
  • Guzzi Hero
  • *
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 23586
  • "diplomatico di moto"
  • Location: NW Arkansas
Re: 1400 bar risers
« Reply #3 on: April 17, 2019, 11:26:23 AM »
One Inch Rise?

Go buy a couple of 1/2" drive sockets that measure 1-inch long.  Buy a couple of bolts that are an inch longer than stock.

It's an easy mod, and the price is nice.  Here's an extreme example, but you get the point:
« Last Edit: April 17, 2019, 11:27:45 AM by rocker59 »
Michael T.
Aux Arcs
1996 Moto Guzzi Sport 1100
"Do what you can, with what you have, where you are." - Theodore Roosevelt

Wildgoose Chase Moto Guzzi

Re: 1400 bar risers
« Reply #3 on: April 17, 2019, 11:26:23 AM »

Offline JohninVT

  • Guzzi Mentor
  • ****
  • Posts: 748
Re: 1400 bar risers
« Reply #4 on: April 17, 2019, 03:17:08 PM »




Sockets wouldn’t really work....

pete roper

  • Guest
Re: 1400 bar risers
« Reply #5 on: April 17, 2019, 05:09:36 PM »
They're the same risers as Griso John. AFAIK Onur is still making them. I'll take a pic of the ones on my Griso a bit later.

Offline JohninVT

  • Guzzi Mentor
  • ****
  • Posts: 748
Re: 1400 bar risers
« Reply #6 on: April 17, 2019, 05:15:05 PM »
They're the same risers as Griso John. AFAIK Onur is still making them. I'll take a pic of the ones on my Griso a bit later.

Onur?  I remember that Mike Bui made some for the 1200 Sport but John Onur doesn’t sound familiar. 

pete roper

  • Guest
Re: 1400 bar risers
« Reply #7 on: April 17, 2019, 05:51:08 PM »
Sorry. Onur Kuraner (Sp.). He's Turkish and makes a few accessories for various Guzzi models. Ordering from him is a bit of a PITA as there is some sort of spat between Paypal and Turkish officialdom which means you can't pay him that way but have to do it through Western Union or one of those mobs.

Really nice gear. He also produces tank rings for Givi 'Tanklock' bags for various models. I'm pretty sure I've got his email somewhere. I'll PM it to you.

Pete

Offline Bulldog9

  • Guzzi Hero
  • *****
  • *
  • *
  • *
  • Posts: 1721
  • Location: United States
Re: 1400 bar risers
« Reply #8 on: April 17, 2019, 07:18:43 PM »
As others have said, they are the same as the Griso. I added some SW Motech universal risers for the Stornello that mount between the bar and stock riser. Well made, nice finish, blend perfectly. Depends if you want them at the bar or the base of the stock riser.
The Living: 1976 Convert, 2007 GRiSO, 2016 Stornello #742, 2008 1200 Sport
The Departed: 2017 MGX, 2014 Norge GT,  In Stasis: 1978 XS750, XS1100SF (134K miles and going)

pete roper

  • Guest
Re: 1400 bar risers
« Reply #9 on: April 17, 2019, 08:00:40 PM »
Onur's risers, (He makes some a bit taller too I believe.) on my Griso.



Pete

Offline vintagehoarder

  • Cycle Hoarders
  • Guzzi Mentor
  • ****
  • *
  • *
  • *
  • *
  • *
  • Posts: 594
  • Ride to Eat, Eat To Ride
    • Facebook Page
Re: 1400 bar risers
« Reply #10 on: April 17, 2019, 08:10:30 PM »
Curt & Debbie's Toys
2019 Honda C125 Super Cubs X2
2018 Triumph Tiger 800
2014 MG V7 Special
2014 MG Cal Touring 1400
1995 XV1100 Virago
1987 Suzuki Samurai (4 Wheels)
1984 MG Convert Cal II
1973 MG Eldorado 850
1969 Yamaha YAS1C

La Grange , KY

Offline Ncdan

  • Global Moderator
  • Guzzi Hero
  • *
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 4875
Re: 1400 bar risers
« Reply #11 on: April 17, 2019, 08:20:50 PM »
I have these and love them https://gtmotocycles.com/products/gt-rx-cnc-bar-risers/


After the addition of these risers how does it effect ones ridding position??

Offline vintagehoarder

  • Cycle Hoarders
  • Guzzi Mentor
  • ****
  • *
  • *
  • *
  • *
  • *
  • Posts: 594
  • Ride to Eat, Eat To Ride
    • Facebook Page
Re: 1400 bar risers
« Reply #12 on: April 18, 2019, 07:59:37 AM »
After the addition of these risers how does it effect ones ridding position??

Completely changed it for me, put me in a more upright riding position, and far more comfortable.

Right after putting them on I did a up and back trip from Louisville to Chicago in one day, no more pain between the shoulder blades.  I love the difference they made.
Curt & Debbie's Toys
2019 Honda C125 Super Cubs X2
2018 Triumph Tiger 800
2014 MG V7 Special
2014 MG Cal Touring 1400
1995 XV1100 Virago
1987 Suzuki Samurai (4 Wheels)
1984 MG Convert Cal II
1973 MG Eldorado 850
1969 Yamaha YAS1C

La Grange , KY

Offline DougG

  • Weekend Warrior
  • ***
  • *
  • *
  • *
  • Posts: 428
  • Location: Adirondack Mts., NY...Blue Ridge Mts., NC
Re: 1400 bar risers
« Reply #13 on: April 18, 2019, 10:20:55 AM »
Hi John,                                                                                                                                                                 4-18-19

The GTMotocycles (Vintagehoarder) units are the same style as the Fast by Ferracci risers and considerably less expensive.  The advantage of these risers is that they bring the bars closer to you as well as higher on the tree.  If that is important to you...it worked out well for me, more upright riding position and elbows less extended, etc.

Be well,
DougG
A possum playing possum is no big deal.  Find one that can play giraffe, now you got yourself something!

Offline rocker59

  • Global Moderator
  • Guzzi Hero
  • *
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 23586
  • "diplomatico di moto"
  • Location: NW Arkansas
Re: 1400 bar risers
« Reply #14 on: April 18, 2019, 12:22:55 PM »
Onur's risers, (He makes some a bit taller too I believe.) on my Griso.



Pete

If those machined spacers will work, so will my Duralast sockets from Autozone!    :grin:
Michael T.
Aux Arcs
1996 Moto Guzzi Sport 1100
"Do what you can, with what you have, where you are." - Theodore Roosevelt

Offline Tom H

  • Guzzi Hero
  • *****
  • *
  • *
  • *
  • *
  • Posts: 2591
  • Location: So. Cal.
Re: 1400 bar risers
« Reply #15 on: April 18, 2019, 02:43:09 PM »
Yes, the sockets would work, but I think it would be lacking in the looks dept.

Between Vintagehorder and Ropes. If you want more back and not so much up, go with Vintagehoarder. If just more up, go with Roper. Both look like they came with the bike.

I went with Rox Risers for my EVT. I mainly wanted back, not up, and they work fine for that.

Just my 2 cents.

Tom
2004 Cali EV Touring
1972 Eldo
1970 Ambo V1000
1973 R75/5 SWB with Toaster
2007 HD Street Bob
1953 Triumph 6T (one day it will be on the road!)

Offline JohninVT

  • Guzzi Mentor
  • ****
  • Posts: 748
Re: 1400 bar risers
« Reply #16 on: April 18, 2019, 05:13:57 PM »
Onur's risers, (He makes some a bit taller too I believe.) on my Griso.



Pete

Those look great.  Do you have contact information for the vendor?  TIA, Pete.

pete roper

  • Guest
Re: 1400 bar risers
« Reply #17 on: April 18, 2019, 06:06:35 PM »
PM sent.

Offline Ncdan

  • Global Moderator
  • Guzzi Hero
  • *
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 4875
Re: 1400 bar risers
« Reply #18 on: April 18, 2019, 07:53:23 PM »
John, if you buy a set and don't like them I'll buy them from you and try them myself and if I don't like them I'll pass them on likewise.

Offline drbone641

  • Weekend Warrior
  • ***
  • *
  • *
  • *
  • Posts: 348
  • Location: Newnan, GA
Re: 1400 bar risers
« Reply #19 on: June 03, 2021, 11:11:32 AM »
Has anyone tried these risers for an Eldorado? the 30mm =1 1/8 inch https://www.revzilla.com/motorcycle/zeta-1-18-handlebar-risers
73 TR6
09 Multistrada
16 Eldorado

Offline Ncdan

  • Global Moderator
  • Guzzi Hero
  • *
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 4875
Re: 1400 bar risers
« Reply #20 on: June 03, 2021, 03:43:29 PM »
Strange this came up.
I coupon weeks ago I ordered a set like that from Revzilla however like got the 1.5” high as well as back or forward depending on which way you turn them. They were pricey, a little over 100 bucks. however very well made billet aluminum, black.
I have an 02 Stone with 1400 tourer bars that one of our fellow members gave to me a while back.
I got the 1 1/8” size which fit the 1400 bars but had to use the same spacers I had made to fit the 1 1/8 1400 bars to the Stone. All came out perfectly and it sure does improve my seating position drastically.


I think a started a post a while back about how much difference just 1 and 1/2 inches makes🤔👿

Offline roadventure

  • Weekend Warrior
  • ***
  • Posts: 221
  • There is no try; There is only do.
  • Location: Millville, Delaware
Re: 1400 bar risers
« Reply #21 on: June 04, 2021, 09:53:46 AM »
After the addition of these risers how does it effect ones ridding position??

More comfortable riding position, in my case.  I have had them installed since 2015 and highly recommend them.
dave
Millville, DE

"Moto Guzzi....you're never more than 500 miles from your nearest dealer"

Offline vintagehoarder

  • Cycle Hoarders
  • Guzzi Mentor
  • ****
  • *
  • *
  • *
  • *
  • *
  • Posts: 594
  • Ride to Eat, Eat To Ride
    • Facebook Page
Re: 1400 bar risers
« Reply #22 on: June 07, 2021, 09:47:38 AM »
After the addition of these risers how does it effect ones ridding position??

I'm 6' 1" and made me more upright which was the desired outcome.
Curt & Debbie's Toys
2019 Honda C125 Super Cubs X2
2018 Triumph Tiger 800
2014 MG V7 Special
2014 MG Cal Touring 1400
1995 XV1100 Virago
1987 Suzuki Samurai (4 Wheels)
1984 MG Convert Cal II
1973 MG Eldorado 850
1969 Yamaha YAS1C

La Grange , KY

Offline moto-uno

  • Guzzi Mentor
  • ****
  • Posts: 947
  • Location: Burnaby , B.C
Re: 1400 bar risers
« Reply #23 on: June 07, 2021, 11:35:28 AM »
  Now this has got my attention . I've developed a painful muscle knot in my right shoulder blade area after about an hour in the saddle
of my 2018 Eldorado . I have an older Guzzi ( much modified Le Mans 2 , kinda T-3 ) and with it's more forward reach and slightly lower
bar reach I've been able to ride 'til my butt hurts and no muscle cramping . I was considering bringing the grips forward and down with
some bars I'm considering making . But these risers and bar back risers seem much easier . But has anyone here suffered similar muscle
cramps and cured them with a riser addition ? My wife really has to rub in the "Voltaren" to allow us to carry on . Peter

Offline drbone641

  • Weekend Warrior
  • ***
  • *
  • *
  • *
  • Posts: 348
  • Location: Newnan, GA
Re: 1400 bar risers
« Reply #24 on: June 16, 2021, 07:18:17 PM »
It's funny, just did a 600 mile loop and had mad neck/shoulder issue on return home. Went around the country on my 2014 1400 Touring and nothing. I'm looking at some riser change
73 TR6
09 Multistrada
16 Eldorado

 


Harper's Moto Guzzi
Harper's Moto Guzzi. Where we still answer the phone, use the highest quality parts, and also do Transmission, rear drive, and carb rebuilds fast. Call us at 816.697.3411 and get your problems resolved.
http://www.harpermoto.com
Advertise Here