New 20 ounce tumblers available now! Forum donation credit with purchase. https://www.wildguzzi.com/Products/products.htm#Tumbler
Pull the two leads from the front brakelight switch and connect them together , if the light comes on it is the switch . Dusty
Careful. ::) Something could blow up. ;D :BEER:Matt
My head did once almost explode once while trying to explain how to wire up a BL switch , the guy couldn't figure out why he kept getting smoke when hooking ground to one side , and hot to the other :o ;D Dusty
KiiDustySome things just can't be fixed......Mark
Switch should be on master where the line starts.
..little tiny ball bearing in the switch that does the pushing...
Bearing ball, not ball bearing! :)
http://www.harpermoto.com/switch-br-light-switch-25657001.html
Sweet, thanks!Saw this as well? German made, always sounds good to me.http://www.ebay.com/itm/MOTO-GUZZI-LE-MANS-SEE-LIST-BELLOW-REAR-STOP-BRAKE-LIGHT-SWITCH-CM-73-/191554806681?pt=LH_DefaultDomain_3&hash=item2c998e6399&vxp=mtr
Note that if the brake lines are the original black 'Rubber' type they are now over thirty years old. I'd consider replacing them at the same time as the switch. All of 'em. Front and linked system.