New 20 ounce tumblers available now! Forum donation credit with purchase. https://www.wildguzzi.com/Products/products.htm#Tumbler
There has to be visible damage before a claim is accepted and the machine must have a full service history.If you have a FSH though and when inspected there is damage a claim can be put in and as long as all the i's are dotted and t's crossed you should be able to get a kit. You will have to pay for installation though.Unfortunately when visible damage becomes apparent varies depending on a number of circumstances but generally by 10,000 km it will be well advanced.Pete
Going to bed now getting late here in OZland , will give it another go tomorrow stay tune!
you do plug into a connector that has blue/ green and white/blue wires on it?
For some reason, every time I use Guzzidiag I have to select the com port.Hope this helps,Tom
Trimixdiver,I'm not the expert here, but you might try the following.When the USB and power cables are connected to the bike, the LED on the cable comes on, right?Now, open Guzzidiag, hit file/ preferences. Select your bike and select com 6. Exit settings.Now file/ connect and see if it connects. If it does not, try another com port and repeat until you pick the correct one.Remember to follow the key on prompts and have your kill switch in the run position, but do not start bike.For some reason, every time I use Guzzidiag I have to select the com port.Hope this helps,Tom
Sorry if this is stating the obvious, but did you open the menu point and click on "connect"?
Shortcut to the .exe on the desktop.
Trimixdiver,I had hoped that it was something simple that may have been overlooked. Dumb question, is there another model or year bike listed that is similar to yours like a '13 instead of '14? Might try it if there is?EDIT: One thing that bothers me is that sounds like you only have 1 com port and it's com6. With Win 10 this may be the way it is, but with XP-8.X there is normally a com1. Is there a com1-5 that are being used for other devices?CAUTION CHECK WITH AN EXPERT FIRST: Might try deleting com6 and restart the computer and let if find a new com port.Good luck with getting it connected, gotta be something simple??Tom
OMG,My shortcut if working fine, the .ini is saving the settings between sessions. Just for whatever reason the tablet style computer added a second com port and the USB cable sometimes switches between the two ports when I turn on the computer for the day. Monday it might be on com1, Tuesday it could be on com2.Other than the com thing, everything works fine, provided i follow the prompts Tom