« previous next »
Pages: [1]   Go Down

Author Topic: Looking for peg-nut socket for transmission/01 Jackal.  (Read 1849 times)

Offline wavedog

  • Gaggle Mentor
  • ****
  • Posts: 856
Looking for peg-nut socket for transmission/01 Jackal.
« on: November 19, 2015, 05:59:53 PM »
Hey all- Looking for a peg-nut socket to purchase so I can get the nut off of the input shaft on my 01 Jackal transmission. Any leads? Thanks in advance.
Logged

Offline guzzisteve

  • Gaggle Hero
  • *****
  • *
  • Posts: 11458
  • "Just Ride It"
Re: Looking for peg-nut socket for transmission/01 Jackal.
« Reply #1 on: November 19, 2015, 06:43:15 PM »
Supposed to be the same as a CARC Swingarm Pin & nut tool.
Logged
"Pray through Carlo & your bike shall be healed"
Location: Planet Earth

Online Antietam Classic Cycle

  • Gaggle Hero
  • *****
  • *
  • Posts: 14186
  • Happily stuck in the past.
    • Antietam Classic Cycle
  • Location: Rohrersville, Maryland
Re: Looking for peg-nut socket for transmission/01 Jackal.
« Reply #2 on: November 19, 2015, 08:09:40 PM »
Quote from: wavedog on November 19, 2015, 05:59:53 PM
Hey all- Looking for a peg-nut socket to purchase so I can get the nut off of the input shaft on my 01 Jackal transmission. Any leads? Thanks in advance.

http://www.mgcycle.com/index.php?main_page=product_info&cPath=80&products_id=657
Logged
Charlie

Offline wavedog

  • Gaggle Mentor
  • ****
  • Posts: 856
Re: Looking for peg-nut socket for transmission/01 Jackal.
« Reply #3 on: November 20, 2015, 05:36:09 AM »
OK, thanks for the info.
Logged

Wildguzzi.com

Re: Looking for peg-nut socket for transmission/01 Jackal.
« Reply #3 on: November 20, 2015, 05:36:09 AM »

Online Wayne Orwig

  • Gaggle Hero
  • *****
  • Posts: 13913
    • Hog Mountain weather
  • Location: Hog Mountain
Re: Looking for peg-nut socket for transmission/01 Jackal.
« Reply #4 on: November 20, 2015, 09:02:40 AM »
Hammer it off with a punch and toss it away.
Get a nut for the OUTPUT shaft. Grind away the part of the nut used to secure it. Install the with some Loctite and bend the tabs over it.
Logged
Scientist have discovered that people will believe anything, if you first say "Scientists have discovered...."

Online Antietam Classic Cycle

  • Gaggle Hero
  • *****
  • *
  • Posts: 14186
  • Happily stuck in the past.
    • Antietam Classic Cycle
  • Location: Rohrersville, Maryland
Re: Looking for peg-nut socket for transmission/01 Jackal.
« Reply #5 on: November 20, 2015, 11:15:53 AM »
Quote from: Wayne Orwig on November 20, 2015, 09:02:40 AM
Hammer it off with a punch and toss it away.
Get a nut for the OUTPUT shaft. Grind away the part of the nut used to secure it. Install with some Loctite and bend the tabs over it.

 :1:

http://www.mgcycle.com/index.php?main_page=product_info&cPath=55&products_id=507

Logged
Charlie
20 Ounce Stainless Steel Double Insulated Tumbler
Buy a quality tumbler and support the forum at the same time!
Better than a YETI! BPA and Lead free.
Advertise Here
Pages: [1]   Go Up
« previous next »
 

Quad Lock - The best GPS / phone mount system for your motorcycles, no damage to your cameras!!
Get a Wildguzzi discount of 10% off your order!
http://quadlock.refr.cc/luapmckeever
Advertise Here