Wildgoose Chase Moto Guzzi

General Category => General Discussion => Topic started by: Kiwi_Roy on July 30, 2021, 03:14:02 PM

Title: Resetting ABS
Post by: Kiwi_Roy on July 30, 2021, 03:14:02 PM
How would one go about reseting the ABS on a 2014 California?
It's had the fluid changed.

Thanks
Roy
Title: Re: Resetting ABS
Post by: Zoom Zoom on July 30, 2021, 03:33:23 PM
The only resetting I am aware of is to recalibrate the ABS after replacing tires. I don't know that a fluid change would matter in that regard.

The procedure for tire change is outlined in the owners manual.

John Henry
Title: Re: Resetting ABS
Post by: pauldaytona on July 30, 2021, 04:28:11 PM
You do have air in the system?

If normal bleeding doesn't solve it, there is an option in PADS the dealer can use to get air out. We will be supplying a version of Guzzidiag that can do it but I have no timeline for you. So if needed up to your dealer.
Title: Re: Resetting ABS
Post by: lucian on July 30, 2021, 07:59:13 PM
 We will be supplying a version of Guzzidiag that can do it

Will really looking forward to this option Paul :bow:
Title: Re: Resetting ABS
Post by: pat80flh on July 31, 2021, 03:54:07 AM
Is the light on? Setting codes?   You could try disconnecting battery, jumpering positive and negative cables together for 30 seconds. This should discharge all capacitors, hopefully clear any soft codes, and "reset" system.
 
Title: Re: Resetting ABS
Post by: Kiwi_Roy on August 01, 2021, 08:34:14 AM
Update.
We have a Guzzidiag fault indicating bad rear speed sensor, the owner will proceed in that direction.