V7 III map - Guzzidiag - Tunerpro

[xackley]

To answer my own question.
If you make changes to Legend TPS20 A, the changes do effect the fueling and ignition.
I changed below 14.10 to higher degrees than oem. Like 2.5 became 3, 4.07 became 6.

Well, what that accomplished was the engine bogged down with a light throttle twist.
The engine recovered when the throttle was twisted into the ranges of TPS degrees I didn't mess with.

So the TPS tables can change throttle response, but would require a lot more finesse than my simple hack.

Modified TPS20 A table that made things worse.
1.00
3.00
6.00
8.00
10.00
11.00
12.00
13.00
13.50
14.10
15.37
16.98
21.10
24.37
30.10
38.08
47.30
58.50
72.30
83.00

Don

[pauldaytona]

To answer my own question.
If you make changes to Legend TPS20 A, the changes do effect the fueling and ignition.
I changed below 14.10 to higher degrees than oem. Like 2.5 became 3, 4.07 became 6.

Well, what that accomplished was the engine bogged down with a light throttle twist.
The engine recovered when the throttle was twisted into the ranges of TPS degrees I didn't mess with.

So the TPS tables can change throttle response, but would require a lot more finesse than my simple hack.

Modified TPS20 A table that made things worse.
1.00
3.00
6.00
8.00
10.00
11.00
12.00
13.00
13.50
14.10
15.37
16.98
21.10
24.37
30.10
38.08
47.30
58.50
72.30
83.00

Don

Leave the tables where you have no clue about how it works alone. You are messing up things.

[xackley]

Leave the tables where you have no clue about how it works alone. You are messing up things.

No kidding. I could find no answer to how the Legend tables related to the ignition and fueling tables.
The experiment was to find if changing Legend tables messed things up, or if the Legends were informational only. The experiment was a success.
I stated it was a hack, which I knew would mess things up or do nothing.
If everyone thought as you, nothing would ever get done.

Don

[chrisfer]

If you make changes to Legend TPS20 A, the changes do effect the fueling and ignition.

I hesitated to recalibrate these values of legend, because the first are not so relevant and there is a lack of around 10°.
But I didn't do it because all the tables that use it are not necessarily visible under TunerPro and it would have taken a long time to try.