Wildguzzi.com

General Category => General Discussion => Topic started by: Don G on March 20, 2019, 03:29:51 PM

Title: 71 Ambo
Post by: Don G on March 20, 2019, 03:29:51 PM
I recently purchased this crusty 71 Ambassador rolling chassis, I did get a 4spd trans a brake lever and a seat. I was planning on building an Ambovert, guess that will happen eventually. What do you think caused this:
(https://i.ibb.co/gS25jcX/V750-TRANS-SHAFT.jpg) (https://ibb.co/gS25jcX)

upload img (https://imgbb.com/)

(https://i.ibb.co/XLv6z2R/IMG-1295.jpg) (https://ibb.co/XLv6z2R)

(https://i.ibb.co/fXMrkNW/IMG-1294.jpg) (https://ibb.co/fXMrkNW)

I havent had a look at the drive yet, I can only imagine the worst, got a Convert drive to use anyway. The Fuel tank is also a Spaghetti strainer, never seen them rust out on top though! Anyone have a decent tank for sale or trade? DonG
Title: Re: 71 Ambo
Post by: RinkRat II on March 20, 2019, 03:45:44 PM


                   
Quote
What do you think caused this:

                         :copcar:   Showing off doing wheelies :evil:

               Paul B :boozing:
Title: Re: 71 Ambo
Post by: Kiwi_Roy on March 20, 2019, 03:48:45 PM
Buggered rear bearing overheated red hot and it twisted

But I like the first answer better  :police:
Title: Re: 71 Ambo
Post by: Don G on March 20, 2019, 04:08:10 PM
  :copcar:   Showing off doing wheelies :evil:
Maybe ditch riding and jumping approaches? DonG
Title: Re: 71 Ambo
Post by: Antietam Classic Cycle on March 20, 2019, 04:09:36 PM
I've seen a few like that. I'm guessing *abuse* - hard launches from a standstill while heavily loaded?

Title: Re: 71 Ambo
Post by: Don G on March 20, 2019, 04:15:24 PM
Abuse no doubt! Will get the rear end out and have a look at the crown and pinion. Here is a shot of the tank, looks like it has Herpes!
(https://i.ibb.co/HhVNJL1/IMG-1296.jpg) (https://ibb.co/HhVNJL1)

Of course we all know what is under that bubble! Sadness!  DonG
Title: Re: 71 Ambo
Post by: yogidozer on March 20, 2019, 04:18:51 PM
Ambovert sounds like a great idea. Good luck, looking forward to progress and pictures!
Title: Re: 71 Ambo
Post by: Kiwi_Roy on March 20, 2019, 04:47:32 PM
Of course we all know what is under that bubble! Sadness!  DonG

Yes we do,
I wonder whether you could extend the life by swilling some Por-15 or Caswell around.
I used Caswell on mine but it's not nearly as bad.
Title: Re: 71 Ambo
Post by: giusto on March 20, 2019, 07:10:07 PM
AmboVert

Conbassador

Conador

Vertador

Title: Re: 71 Ambo
Post by: canuck750 on March 21, 2019, 09:12:04 AM
I recently purchased this crusty 71 Ambassador rolling chassis, I did get a 4spd trans a brake lever and a seat. I was planning on building an Ambovert, guess that will happen eventually. What do you think caused this:
(https://i.ibb.co/gS25jcX/V750-TRANS-SHAFT.jpg) (https://ibb.co/gS25jcX)

upload img (https://imgbb.com/)

(https://i.ibb.co/XLv6z2R/IMG-1295.jpg) (https://ibb.co/XLv6z2R)

(https://i.ibb.co/fXMrkNW/IMG-1294.jpg) (https://ibb.co/fXMrkNW)

I havent had a look at the drive yet, I can only imagine the worst, got a Convert drive to use anyway. The Fuel tank is also a Spaghetti strainer, never seen them rust out on top though! Anyone have a decent tank for sale or trade? DonG

Looking good Don! 

Did you get that bike out of Regina?

A friend told me about a loop with no motor for sale a couple weeks back but I resisted making the phone call!
Title: Re: 71 Ambo
Post by: Don G on March 21, 2019, 11:19:27 AM
Canuck: That one came from Saskatoon, was originally sold @ Prairie Cycle Works in Regina , the story I was told about it was the engine was pulled out in 1976(has 76 plate on it) at the dealer, the engine and exhaust system was not recovered with the bike. Likely someone didn't pay their bill! Anyway the present owner was selling parts off it, when I purchased it he made me promise not to part it out! Oh the hypocrisy!  :rolleyes: So really all I got was a rolling chassis that is rusted bad , will build a fluid drive Ambo out of it.  DonG