Wildguzzi.com

General Category => General Discussion => Topic started by: pete roper on April 09, 2019, 05:27:12 PM

Title: Call1100 Headers?
Post by: pete roper on April 09, 2019, 05:27:12 PM

Does anyone make these with sensor ports already installed? Mine not only look like crap but don't have ports for logging work.

Title: Re: Call1100 Headers?
Post by: guzzisteve on April 09, 2019, 06:01:43 PM

Pete, yes there are headpipes that are stock w/one by bottom curve or just after it on both sides. Can't remember which Cali or if it was an 1000. I'm thinking a 93 SP3 or Cali 1000. I have a set but they are on the Cal2 and it's up the road in my space. My EV has a X-over w/one bung, let me go look at headers.

OK, my 98EV has one on ea side in front of the area X-over slides on, they are marked  Moto Guzzi T 295

Went back down again and Stock Cal2 single wall has them in same place but have way smaller threads. These ports may be for factory sniffers.

Title: Re: Call1100 Headers?
Post by: Antietam Classic Cycle on April 09, 2019, 06:36:43 PM

I bought a set of these from Ed for a customer's Convert. Stainless with bungs!

https://www.ebay.com/itm/moto-guzzi-jackal-EV-exhaust-headers/273161051127?hash=item3f99aadbf7%3Ag%3AFO4AAOSw3YJZSdCQ&LH_ItemCondition=4

Title: Re: Call1100 Headers?
Post by: pete roper on April 10, 2019, 12:12:28 AM

Thanks Charlie!

Title: Re: Call1100 Headers?
Post by: janguzzi on April 10, 2019, 02:48:13 AM

The ones on a Cali Vintage have these sensor ports.
Material is stainless steal but with chrome (not polished)!

Right: 976066
Left: 976067