Wildguzzi.com

General Category => General Discussion => Topic started by: Steve350f on April 19, 2019, 07:41:52 PM

Title: Eldo 1400 grips
Post by: Steve350f on April 19, 2019, 07:41:52 PM

Are the grips on the Eldo 1400 anything special in regards to replacing them with something better?  I like the factory "OEM Moto Guzzi Journey Handgrip - PAIR 2S000335" but $345!!!  Are there aftermarket options or am I stuck with Guzzi proprietary options? 

Title: Re: Eldo 1400 grips
Post by: Zoom Zoom on April 20, 2019, 10:24:28 AM

No. You need the bar diameter but that's about it. The bars reduce down by the controls so don't measure in the middle someplace.

John Henry

Title: Re: Eldo 1400 grips
Post by: Steve350f on April 20, 2019, 10:39:53 AM

So regripping the existing throttle tube is an option?  I’ve seen ones before that you can’t do that, all
one piece. I was wondering if the throttle tube was proprietary. 

Title: Re: Eldo 1400 grips
Post by: Smithy on April 20, 2019, 06:48:55 PM

If you have a pre 2016 get these..plugs and contols are already fitted and work great.

Moto Guzzi Heated Grips Set for 1400's (B064270)

Title: Re: Eldo 1400 grips
Post by: Steve350f on April 21, 2019, 10:12:19 PM

Quote from: Steve350f on April 20, 2019, 10:39:53 AM

So regripping the existing throttle tube is an option?  I’ve seen ones before that you can’t do that, all
one piece. I was wondering if the throttle tube was proprietary.

Anyone?