Wildguzzi.com
General Category => General Discussion => Topic started by: radguzzi on April 19, 2019, 08:09:54 PM
-
Asking for a friend... kid you not.
I fellow rider here has a thing for a 2013 Griso 8V and has asked a couple of questions about the Guzzi and I hesitate to caution him on whether that years was part of the need for rollerization unless it is... I did not want to alarm him unnecessarily.
https://philadelphia.craigslist.org/mcy/d/morrisville-2013-moto-guzzi-griso/6866158018.html
Appreciate any assistance here.
Best,
Rob
-
AFAIK, 13s were rollerized from the factory.
-
Thanks Chuck,
I'll let him know… Awesome. He is out of control, head over heels for this one and I did ot want to stop him, well, unless I had to break the bad news.
Appreciate the sanity check.
Best
Rob
-
The changeover point according to the factory was in the second quarter 2012. While the changeover point numbers are a bit rubbery I've never seen a 2013 model with flatties so he should be good to go. Simple way to find out is pop a rocker cover and look, ten minutes work on a Griso.
Pete
-
The changeover point according to the factory was in the second quarter 2012. While the changeover point numbers are a bit rubbery I've never seen a 2013 model with flatties so he should be good to go. Simple way to find out is pop a rocker cover and look, ten minutes work on a Griso.
Pete
Yup, copy that. I'll let him know. I should be able to come up with a picture of what he will be looking at so he can get a warm fuzzy when he pops the cover off. He is new to Guzzi... send him off with a 6mm Allen and get his first maintenance lesson.
Thanks Pete,
Rob
-
seems like a fair price. Could probably buy it for 7.
-
A 13 can be produced in 12 easy, but looking up the vin its a MY13, so looks safe. Sold november 13