Wildguzzi.com

General Category => General Discussion => Topic started by: BillinPA on May 12, 2019, 02:21:19 PM

Title: EV fairing question
Post by: BillinPA on May 12, 2019, 02:21:19 PM

Has anyone here fitted a "buffalo" fairing from an Eldo to an EV.  I dont have one to test fit so looking for any info before I  buy one. I plan on making my own mounts.  Curious as to how it interfaces with the EV headlight.

Title: Re: EV fairing question
Post by: bigbikerrick on May 12, 2019, 02:40:46 PM

I believe you would have to modify the headlight opening in the buffalo fairing, as I am pretty sure the EV headlight is of a slightly larger diameter, and it has to poke through the fairing opening. I would be interesting to see how a buffalo fairing would look on a later model cali.   :gotpics:
Rick.

Title: Re: EV fairing question
Post by: BillinPA on May 12, 2019, 03:38:45 PM

That is the part I'm unsure of Rick. The turn signals would need relocated,  not a big deal but the headlight I interface could be problematic.

Title: Re: EV fairing question
Post by: bigbikerrick on May 12, 2019, 04:29:37 PM

You can always replace the headlight with an aftermarket one of the correct diameter. How about the "touring" fairing made for the EV? I have 2 Guzzis running those, and like them alot.
Rick.

Title: Re: EV fairing question
Post by: BillinPA on May 12, 2019, 06:15:24 PM

That could be an option,  I'm interested in the other as I had one on my Eldo,worked well and I think would look good on the ev.