Wildguzzi.com

General Category => General Discussion => Topic started by: fasduc on June 05, 2019, 07:53:32 PM

Title: Lemans 1 headlight shell
Post by: fasduc on June 05, 2019, 07:53:32 PM

Hello, I have '77 LeMans USA model with a broken mounting tab on the top of the headlight shell where the headlight ring hangs from (please see pic).  I want to fabricate a new one but need the measurement for the height of the tab.  Could one of you guys with a LM1 USA model possibly measure yours and tell me how tall it is?  I would greatly appreciate it!  I have looked all over for a replacement shell and there are none to be found.  If any of you know of one please let me know.

Thanks,
Chris

(https://i.ibb.co/NrdwLX9/IMG-20181130-163934485.jpg) (https://ibb.co/NrdwLX9)

Title: Re: Lemans 1 headlight shell
Post by: Motorad64 on August 22, 2019, 01:16:27 PM

Ill look tonight.  Haven't installed the headlight in my '78 rebuild yet. 

Title: Re: Lemans 1 headlight shell
Post by: Antietam Classic Cycle on August 22, 2019, 02:43:00 PM

Tab is the same on the T, T3, Convert, G5 shells that use the same wide rim. Looks like 8 mm.

(https://i.ibb.co/ZVL9cSx/Joel-s-wiring-3-009.jpg) (https://ibb.co/ZVL9cSx)

Title: Re: Lemans 1 headlight shell
Post by: fasduc on August 22, 2019, 06:18:28 PM

Quote from: Antietam Classic Cycle on August 22, 2019, 02:43:00 PM

Tab is the same on the T, T3, Convert, G5 shells that use the same wide rim. Looks like 8 mm.

(https://i.ibb.co/ZVL9cSx/Joel-s-wiring-3-009.jpg) (https://ibb.co/ZVL9cSx)

Thank You!!!

Title: Re: Lemans 1 headlight shell
Post by: Antietam Classic Cycle on August 22, 2019, 07:58:56 PM

You're welcome.