Wildguzzi.com
General Category => General Discussion => Topic started by: SLDMRossi on June 07, 2019, 10:22:07 AM
-
Sunday, June 9, 2019
New England Spring Fling 2
10:00 AM -- 2:00 PM
Sweet Evalina's Stand
688 Route 169
Woodstock, CT 06281
www.sweetevalinas.c om
Our second annual, up in the far Northeast corner of Connecticut. Come by as your schedule permits, grab some lunch, check out the bikes and celebrate the arrival of the 2019 season! We had 20 riders at last year's, on what was a grey, dreary day. This year, the weather promises to be spectacular...so we expect an even better turnout!
See you on Sunday,
Steven Rossi
CT-RI MGNOC State Rep.
(248) 470-5788
-
INDEED! Thank you, Steve. R3~
-
Tomorrow = clear, bright, sunny, 80-ish! By the time I get to Woodstock...
SR
-
I have to take a pass.
Other commitments.
TOMB
-
Wow...what a day! Glorious weather, good folks and friends on hand, great food...and a good number of newbies, too. Twenty seven Guzzis ridden to Woodstock for Spring Fling 2, in all...
Here's what you missed seeing (along with a good number of exotic sidecar rigs, with a group that descended on Sweet Evalina's, as well):
Eldorado (2)
SubaGuzzi...that's an Eldo with a flat-four, Subaru engine and a sidecar
V50
Jackal
V11 EV (4)
V11 Bassa
V11 Stone
V11 LeMans
V11 Sport
V7 Classic
V7 Stone
V7 Racer
V7 II Stone
V7 III Special
V7 III Racer
1100 Breva
Griso
Norge
Stelvio
California 1400 Touring (3)
Audace
SR
-
It was a good showing. I was impressed with the sidecar crowd, and the vintage Honda S90 (maybe) with the rigged oil cooler. Owner, I want to learn more about this, message me.
Joe
-
Sorry I missed it!! Just got the CX on the road and didn't see this until late afternoon! Hope to catch you next time.
-
Joe,
A few of us got to talk with the owner of that little Honda. The engine displaces 90cc. (Re-barreled from 50cc). Made in China and cheaper than dirt. The so-called factory oil cooler was trashed in favor of what you saw. Owner said the oil cooler is to help cool the engine during long high speed runs.
That thang is really out gunned by most anything. He claimed a 40 - 50m/h cruise. With a contact patch 1/2 the size of a dime and suspicious braking; what would you do? R3~
-
some pics for your enjoyment from Sunday's event.
(https://i.ibb.co/wwCCBzK/IMG-0109.jpg) (https://ibb.co/wwCCBzK) (https://i.ibb.co/JvdV4pW/IMG-0112.jpg) (https://ibb.co/JvdV4pW) (https://i.ibb.co/5FrvBq9/IMG-0113.jpg) (https://ibb.co/5FrvBq9) (https://i.ibb.co/br13Rxn/IMG-0114.jpg) (https://ibb.co/br13Rxn) (https://i.ibb.co/ctqqKDn/IMG-0115.jpg) (https://ibb.co/ctqqKDn) (https://i.ibb.co/crSvJ49/IMG-0116.jpg) (https://ibb.co/crSvJ49) (https://i.ibb.co/wCgKWv5/IMG-0117.jpg) (https://ibb.co/wCgKWv5) (https://i.ibb.co/dLppB0j/IMG-0118.jpg) (https://ibb.co/dLppB0j) (https://i.ibb.co/vj8jbpy/IMG-0120.jpg) (https://ibb.co/vj8jbpy) (https://i.ibb.co/vsm8vVp/IMG-0132.jpg) (https://ibb.co/vsm8vVp)
-
Nice turn out, I wish I could have made it.
-
Subaguzzii I believe I rode that sidecar up in Skowhegan at least 25 years ago ,then I went to the guys shop I believe he runs a machine shop in Reading Mass, he did make some exhaust Port flanges for the Guzzi Roundheads for the screw inserts and Norton parts.
No current info on what parts if any at this time.
He made is adapters to the Guzzi transmission, cast his own wheels., mounted the Subaru engine, had Earls style forks.Adapted water cooling from the engine to a heater in the sidecar for winter riding with his wife.
The sidecar was an English made probably a. WATSONION with a door, was completely enclosed..
Very well thought out.
I was riding a Watsonion Monza mounted to a Eldorado.
Fun was had by all.
TOMB
-
Joe,
A few of us got to talk with the owner of that little Honda. The engine displaces 90cc. (Re-barreled from 50cc). Made in China and cheaper than dirt. The so-called factory oil cooler was trashed in favor of what you saw. Owner said the oil cooler is to help cool the engine during long high speed runs.
That thang is really out gunned by most anything. He claimed a 40 - 50m/h cruise. With a contact patch 1/2 the size of a dime and suspicious braking; what would you do? R3~
R3,
Okay, so he substituted the factory oil cooler for this mod. I thought he plumbed it it originally, which would have been more interesting.
It's still a sweet machine for around town. You know, to scare the Harley dudes.
Joe
And Gerry, thanks for the pics!