Wildguzzi.com

General Category => General Discussion => Topic started by: Gusable on June 15, 2019, 09:29:31 AM

Title: EV CANISTERECTOMY
Post by: Gusable on June 15, 2019, 09:29:31 AM

I HAVE ALL THE CHARCOAL CANISTERS AND TUBING ON MY BIKE AND IM ASSUMING THOSE ARE THE TWO VACUUM LINES TO THE THROTTLE BODIES. I WANT TO REMOVE ALL THAT EVAP STUFF WHEN I DO MY TANK REMOVAL AND ALL THE FUEL LINES ETC..  CAN I PULL THOSE THROTTLE BODY HOSES FOR NOW AND CAP THEM?  I CLEANED MY TPS (ON THE BIKE) AND THE IDLE DROPPED SLIGHTLY. I WANT TO TURN OUT THE IDLE AIR BLEEDS A SMIDGE AND CHECK THE IDLE BALANCE. THEN CAP THOSE HOSE NIPPLES.  DO I NEED TO CONNECT THOSE 2 HOSES TOGETHER WHEN I REMOVE THEM?

Title: Re: EV CANISTERECTOMY
Post by: guzzisteve on June 15, 2019, 10:27:06 AM

Once you disconnect the L & R intake hoses, they are dead. No need to do anything w/old lines but to the junkyard.  Capping inakes w/vacuum caps or put a 6mm screw in hole.
I threw out a big box of those, bout 20 sets

Title: Re: EV CANISTERECTOMY
Post by: flower_king001 on June 15, 2019, 11:34:50 AM

These are the plugs i have been using for years

https://www.beemerboneyard.com/13547694924.html

Title: Re: EV CANISTERECTOMY
Post by: Gusable on June 15, 2019, 03:12:27 PM

THANK YOU