Wildguzzi.com

General Category => General Discussion => Topic started by: steven c on June 20, 2019, 11:02:35 AM

Title: Centauro injectors again
Post by: steven c on June 20, 2019, 11:02:35 AM

While cleaning I noticed that the fine mesh filter is damaged will this be an issue? Also is the white grease on the o rings something special?
(https://i.ibb.co/YkWyfVP/76075461-CED3-4013-9-AF8-E50-C6-A59-D5-B4.jpg) (https://ibb.co/YkWyfVP)

Title: Re: Centauro injectors again
Post by: acogoff on June 20, 2019, 09:34:09 PM

    Well, it appears to me that the screen needs to be replaced. Is not the black plastic part just the holder for the screen. I can see the holes the filtered air would feed in to. Not good having those screen chunks going inside bunging things up. Grease looks like plain old spray can white lithium to me.

Title: Re: Centauro injectors again
Post by: steven c on June 21, 2019, 06:54:30 AM

Where can you get parts for these things. Harpers has the whole injector for lots of cash. But I didn’t se any rebuild kits.