Wildguzzi.com

General Category => General Discussion => Topic started by: knockerjoe on October 03, 2019, 10:00:13 AM

Title: 96 California 1100i Diagnostic LED not working?
Post by: knockerjoe on October 03, 2019, 10:00:13 AM

 Diagnostic LED light on my 96 California 1100i not working, see below.
(https://i.ibb.co/1GmrQsy/51568-FA9-9688-4415-ACCF-5487-AFAC3136.jpg) (https://ibb.co/1GmrQsy)

Title: Re: 96 California 1100i Diagnostic LED?
Post by: fotoguzzi on October 03, 2019, 10:21:56 AM

Yes

Title: Re: 96 California 1100i Diagnostic LED?
Post by: knockerjoe on October 03, 2019, 10:28:12 AM

Ok, I was pretty sure but thought I would ask as I am not getting any blinking.
I am using the plug off the ECU with the jumping plug. I have tried jumping the plug before and
after key to the on position.
Quick note: this is a non running bike I just picked up. I have a Guzzidiag cable coming next week.
I thought I would get a head start and try to pull off some codes.

Title: Re: 96 California 1100i Diagnostic LED?
Post by: Wayne Orwig on October 03, 2019, 10:32:16 AM

That ECU does not store code. It will only show active faults. Not much value to it. In later years they hid it under the seat.
GuzziDiag is much more useful, but again, that ECU does not store faults.

Title: Re: 96 California 1100i Diagnostic LED not working?
Post by: Kiwi_Roy on October 03, 2019, 05:46:03 PM

I strongly suggest you print this out, it's a great reference for your Fuel Injection system.
The list of codes appears on page 24, it probably has no errors, that's why the light isn't flashing.

https://dpguzzi.com/efiman.pdf