Wildguzzi.com

General Category => General Discussion => Topic started by: Ronkom on October 20, 2019, 01:33:25 PM

Title: brembo front wheel cylinder needed
Post by: Ronkom on October 20, 2019, 01:33:25 PM

My Son rides an '03 Stone, we've updated it w floorboards/controls & other bits from an EV, including a dual disc front wheel. I bought the right side wheel cylinder from the EV to finish the install on the Stone, only to find the bolt spacing is different & the EV part won't work. So we need the correct right side wheel cylinder to bolt up to the Stone fork leg, anybody have one they'd sell?  Just having a correct part number and/or a list of the models using the part would help.
Thanks,
Ron

Title: Re: brembo front wheel cylinder needed
Post by: Loop Tonti EV on October 21, 2019, 09:10:48 PM

Ron, the early EVs had a tighter bolt pattern on the caliper mount. My '01 is a wide pattern compared to the 98 my dad used to have. I think your going to need one from a 2001 or later EV or one from a 2001 or later Bassa. The mounts on the early ones were about 40 mm I  believe. My '01 EV is around 65 mm.