Wildguzzi.com
General Category => General Discussion => Topic started by: Chuck in Indiana on November 15, 2019, 11:07:25 AM
-
Unbelievable. I'm not finding any even semi local source for molex pins for the G5. Normally, I'd grumble about having to go to Fry's in Indy, but they don't have any. I need .093s, and all I have (from Radio Shack, also out of business) are .062s. I can get a reel of 15000 from a local industrial supplier, but I might not need that many. :smiley:
Yeah, I see I can get a pack of 100 from Mcmaster carr for approximately 20 bux (!) but I only need a few.
-
Contact Greg Bender <greg@thisoldtractor.com>
-
Contact Greg Bender <greg@thisoldtractor.com>
I hate to bother him for a nickle and dime thing like this.. :smiley: Yeah, he was the first guy I thought of. Just thought maybe someone would know of a hardware or electronics chain that would have them. The last time I was in Fry's, it looked like they were going out of business. Most of this kind of stuff was gone. :sad:
-
Maybe here?
http://www.cycleterminal.com/motorcycle-connectors.html
Tom
-
Try these guys: https://www.electronicsurplus.com/ Here is their phone #: (440) 205-8388 They are very close to me, should they have what you need, I'm ok with going over there, buying it, picking it up and mailing it to you. Let me know.
Tom
Mentor, Ohio
-
https://www.amazon.com/s?k=molex+pins&ref=nb_sb_noss_1
https://www.amazon.com/Molex-18-24-Gauge-Female-Connector/dp/B075RHZNBX/ref=sr_1_3?keywords=molex+pins&qid=1573843032&sr=8-3
https://www.amazon.com/40-Pair-Molex-Pin-02-09-1104/dp/B07366RRPX/ref=sr_1_2?keywords=molex+pins&qid=1573843120&sr=8-2
-
All good above suggestions...
I have also been very lucky with asking Molex for samples when I needed a few. They have sent me 50 of one pin for no cost in the past.
-
Try these guys: https://www.electronicsurplus.com/ Here is their phone #: (440) 205-8388 They are very close to me, should they have what you need, I'm ok with going over there, buying it, picking it up and mailing it to you. Let me know.
Tom
Mentor, Ohio
Thanks for that. (!) I appreciate it, but I'll just order them from Amazon. They have actual Molex parts, shipped free. (Prime)
I was just looking for somewhere I could go *today* and get a few. As it is, I managed to get the two pins that were a problem out, "carefully" :smiley: repaired them, put a drop of solder on the wire where the OP had boogered up the crimps and reassembled. Some day :rolleyes: I'll replace these two connectors in the headlight completely as I go through the electrical system.
-
Any Harley-Davidson dealer *should* stock them. That's where I get mine.
-
https://www.waytekwire.com/?msclkid=8d98bf98f66c163c04bfe257e781d9e5&utm_source=bing&utm_medium=cpc&utm_campaign=Waytek%20Wire%20-%20Branded&utm_term=waytek%20wire&utm_content=Branded
this outfit is good for that stuff
-
I carried a box of those around for years when I was a embroidery machine tech. I used to cuss them when the box came open inside my tool box when tossed by baggage handlers Hmmmm I wonder if they're in a tool box somewhere???? Probably mixed in with some hook assembly parts, bobbin case parts, thread tension springs and some old 75-11 BP needles.
-
http://easternbeaver.com R3~
-
Also:
http://www.vintageconnections.com/Products/Connectors
.