Wildguzzi.com
General Category => General Discussion => Topic started by: Old Jock on March 07, 2020, 08:52:35 AM
-
So I've given up on the HiCam for now and I'm trying to get rid of the oil leak on the 1100 Sporti
After doing back and front seals, the original job took a unforseen turn (normal in my experience)
One look at the RAM cutch friction plate gave me the "willies" so I decided to go back to the 2 plater. I also don't mind been a bit spendy with the few bikes I have. Sooooooo........whe n perusing MG Cycle's site I seen this (alongwith some other odds and ends)
http://www.mgcycle.com/index.php?main_page=product_info&cPath=193&products_id=4409 (http://www.mgcycle.com/index.php?main_page=product_info&cPath=193&products_id=4409)
Lightweight flywheel for V11, Griso etc: and wondered would it/could it go into the Sporti, rather than the standard 2kg flywheel, basically halving the rotating mass. Albeit, not available and pretty bloody spendy, but the one of the things I do like with the RAM is lighter flywheel, just makes the bike seem more perky.
Asking the more informed than me (wouldn't be difficult) if that's possible or not as lightend flywheels seem easy to get for the 8 springers not so much for the 10 springers and impossible for the Sports/Hi Cams from what I've seen so far