Wildguzzi.com

General Category => General Discussion => Topic started by: badrday on April 17, 2020, 03:44:59 PM

Title: Parts: Norge 2013 vs Norge 2012
Post by: badrday on April 17, 2020, 03:44:59 PM

Hi all,

I've just bought a Norge 2013 (and I'm waiting for the delivery) and I'm trying to buy parts I'll need for the next service. But I have hard time finding out the right part reference numbers/or the right equivalent.

Is there any significant differences between the Norge 2013 (and up) and the Norge 2012, in regards to parts?

A lot of website only list parts for up to 2012 model, like in this website, https://revco.ca/all-balls-motorcycle-fork-and-dust-seal-kit.html

Also, is any 48x58x10mm seal compatible with the Norge 2013 front fork?

Thank you for your assistance.
Badrday

Title: Re: Parts: Norge 2013 vs Norge 2012
Post by: Huzo on April 17, 2020, 03:52:03 PM

Quote from: badrday on April 17, 2020, 03:44:59 PM

Hi all,

I've just bought a Norge 2013 (and I'm waiting for the delivery) and I'm trying to buy parts I'll need for the next service. But I have hard time finding out the right part reference numbers/or the right equivalent.

Is there any significant differences between the Norge 2013 (and up) and the Norge 2012, in regards to parts?

A lot of website only list parts for up to 2012 model, like in this website, https://revco.ca/all-balls-motorcycle-fork-and-dust-seal-kit.html

Also, is any 48x58x10mm seal compatible with the Norge 2013 front fork?

Thank you for your assistance.
Badrday

Welcome mate.
Enjoy your new bike. I cannot tell you about the fork seal because I’ve never done one on my Norge.

Title: Re: Parts: Norge 2013 vs Norge 2012
Post by: craigclu on April 17, 2020, 05:49:24 PM

Search in here for "rollerization" threads as that was the period of production when they upgraded to the roller cam valvetrain.  This was the main change in that time period.

Title: Re: Parts: Norge 2013 vs Norge 2012
Post by: badrday on April 17, 2020, 06:12:46 PM

Thanks Huzo and Craidclu,

In regard of the rollerization, and if I believe this post, I should be safe:
https://www.guzzitech.com/forums/threads/everything-you-ever-wanted-to-know-about-the-1200-8v-engine-tappet-failure-but-were-afraid-to-ask.17282/ (https://www.guzzitech.com/forums/threads/everything-you-ever-wanted-to-know-about-the-1200-8v-engine-tappet-failure-but-were-afraid-to-ask.17282/)

I've checked the VIN and this bike was maid on May 2013 (with a serial number after 12214)

Quote

Norge - AA - After 12214 - 04/18/2012

Thanks