Wildguzzi.com

General Category => General Discussion => Topic started by: amamet on September 19, 2020, 06:30:01 PM

Title: well, vibrations are gone I think
Post by: amamet on September 19, 2020, 06:30:01 PM

removed the dyna sensor plate and rotor, checked my flywheel marks and reinstalled dyna bits and timed the lemans.  think I installed the distributor incorrectly the first time as the notch in the center shaft wasn't where it was supposed to be.  instead of the notch at 11:00 seated it was 5:00 seated while the right cylinder was tdc.  seems to be much smoother now.  I can actually see behind me now with my mirrors.  going to go back and sync the carbs again.  also retorqued the heads and adjusted the valves which had tightened up a bit.  bike now has 450 mile since the rebuild. almost time for the oil change.  now that I forgot to order an oil filter when I just placed a big order at mgcycles this week.  is there a cross reference for the oil filter or do need to get it from one of our guys?
thx
allen

Title: Re: well, vibrations are gone I think
Post by: oldbike54 on September 19, 2020, 07:25:43 PM

  :thumb:

 Dusty

Title: Re: well, vibrations are gone I think
Post by: moto-uno on September 19, 2020, 11:09:24 PM

 Can you just cross reference the UFI filter number ? Peter