Wildguzzi.com

General Category => General Discussion => Topic started by: steven c on October 13, 2020, 01:20:02 PM

Title: Centauro fork seals
Post by: steven c on October 13, 2020, 01:20:02 PM

 Are there any tutorials on replacing the fork seals? I haven't been able to find any. They are leaking pretty bad now leaving a nice stain on the floor.

Title: Re: Centauro fork seals
Post by: SLDMRossi on October 13, 2020, 04:28:04 PM

If you've tried all the usual sources Stateside, then give Teo Lamers a try...

SR

Title: Re: Centauro fork seals
Post by: steven c on October 13, 2020, 06:17:51 PM

 I find a PDF of the workshop manual. Which should help. They are similar to the Buells which I did seals and bushings on last year but they are different enough.

Title: Re: Centauro fork seals
Post by: fotoguzzi on October 13, 2020, 08:06:43 PM

It's easy to butcher those fork legs so go easy. You almost need to make a special tool to remove.

(https://i.ibb.co/3BfG7mV/0-F087-E25-DE7-E-431-E-A7-EC-E243-A8740-CA9.jpg) (https://ibb.co/3BfG7mV)

(https://i.ibb.co/k9ZBH8z/BFA8-F320-C36-C-48-A1-B492-686390996826.jpg) (https://ibb.co/k9ZBH8z)

I didn't do that butchery, PO did.

Title: Re: Centauro fork seals
Post by: rschrum on October 13, 2020, 10:39:08 PM

This might help.
https://archive.guzzitech.com/WPOilChange-Steven_I.html

Title: Re: Centauro fork seals
Post by: steven c on October 14, 2020, 11:54:33 AM

Thanks that will be a big help. :thumb: