Wildguzzi.com

General Category => General Discussion => Topic started by: bad Chad on March 17, 2021, 01:59:17 PM

Title: v9 Roamer bar risers?
Post by: bad Chad on March 17, 2021, 01:59:17 PM: I want to raise the bars. I bought a set of bilt 22mm risers that seem pretty nice, however the bolt center on the risers are 32-36mm, and they don't fit. As I measure, Guzzi chose to use a 40mm distance center to center! Anyone know where I can find risers with a 40mm bolt pattern?
Title: Re: v9 Roamer bar risers?
Post by: Joliet Jim on March 17, 2021, 09:33:33 PM: Quote from: Zoom Zoom on March 17, 2021, 07:29:13 PM
I don't know whether this would work on the v9 or not, but do you remember when people were putting chrome socket underneath there with a longer bolt into the top trouble clamp? Would that possibly work on the v9?

ZZ

Craftsman forget the size but I've got two of them from the Stone
Title: Re: v9 Roamer bar risers?
Post by: greer on March 19, 2021, 05:21:04 AM: Shaft collars work well, too. A couple of them stacked together will get you right at an inch.

Sarah
Title: Re: v9 Roamer bar risers?
Post by: Dimitri_Harkov on March 19, 2021, 11:09:15 AM: LSL has bar risers for the V9:
https://www.lsl.eu/121-m021?___store=en

But I guess shaft collars will do the trick for less $$$.

Cheers,
D.
Title: Re: v9 Roamer bar risers?
Post by: bad Chad on March 19, 2021, 03:24:44 PM: Thanks, but those are bobber clamps, a little different.

Shaft collars? Is that like a cock ring? Just kidding, but really, what are shaft collars?
Title: Re: v9 Roamer bar risers?
Post by: Dimitri_Harkov on March 19, 2021, 03:29:20 PM: Those fit both the Roamer & Bobber.
Title: Re: v9 Roamer bar risers?
Post by: Joliet Jim on March 20, 2021, 08:23:23 AM: Quote from: bad Chad on March 19, 2021, 03:24:44 PM
Thanks, but those are bobber clamps, a little different.

Shaft collars? Is that like a cock ring? Just kidding, but really, what are shaft collars?

when you were little they dropped you on your head a few times didn't they?
Title: Re: v9 Roamer bar risers?
Post by: bad Chad on March 20, 2021, 11:10:49 PM: All resolved. Thanks for the good ideas. Used a rat tail file to increase to bolt pattern, worked like a charm.