Wildguzzi.com

General Category => General Discussion => Topic started by: dxhall on June 04, 2021, 10:02:42 PM

Title: Hepco Becker bags on LeMans V
Post by: dxhall on June 04, 2021, 10:02:42 PM

I bought an unused set of Hepco Becker racks for my LeMans V a few years ago, still in factory packaging.  I’m now trying to fit them.  There seems to be something missing or (more likely) the pieces I have aren’t for an LM V.  This may be why the (unnamed) dealer sold them so cheaply.  At any rate, before I get out the welder, I’d like to know how the correct pieces fit.  Does anyone have a set of Hepco Becker racks on a LeMans III, IV, or V which they can photograph for me?

Title: Re: Hepco Becker bags on LeMans V
Post by: guzziart on June 05, 2021, 06:31:20 AM

LM4

(https://i.ibb.co/nkhYGQg/20210605-072418.jpg) (https://ibb.co/nkhYGQg)


(https://i.ibb.co/Z8TX5xT/20210605-071933.jpg) (https://ibb.co/Z8TX5xT)


(https://i.ibb.co/rpS2ckd/20210605-071710.jpg) (https://ibb.co/rpS2ckd)


(https://i.ibb.co/JB9J3Z1/20210605-073544.jpg) (https://ibb.co/JB9J3Z1)

Title: Re: Hepco Becker bags on LeMans V
Post by: dxhall on June 05, 2021, 07:30:54 AM

Thanks a bunch - that’s just what I needed.  Looks like I have the wrong lower support bars, and am missing the latch pieces.  Moral: racks on sale = grief.

Addendum:  Guzziart, can you post a photo of the small latch piece that bolts on to the back of the rack?  It looks like something I can make in the milling machine.