Wildguzzi.com

General Category => General Discussion => Topic started by: Ncdan on June 12, 2021, 11:29:38 AM

Title: Please read (re: Luap’s moderator thread)
Post by: Ncdan on June 12, 2021, 11:29:38 AM
I would like to express my thanks to Luap, and each and every member of the WG Forum for the opportunity to serve as a moderator, and yes I do take this as a position of service to the forum and its members.

I will only be observing the four rules that Luap has in place and encourage members to re-familiarize themselves with them occasionally.
Enough said about rules:)

I do have a couple requests of all members.
Let’s all be mindful of our responses during a post or thread and keep them respectful and present ourselves as gentleman (or ladies) before we hit the “post” button.
If we really feel strongly about an issue with something that’s been posted by someone, take it outside, in others words, off the forum in a PM status.
Lastly, let’s refrain from starting a thread that we know may become controversial and sensitive in nature that may encourage disagreements. 
I feel if we all recognize these simple observations there will be very little need for the interaction of a moderator, period.

Again let me sincerely thank everyone for the opportunity to serve such a great resource as the WG Forum and such a great and diverse group of members.
I’m offering my contact information in the event anyone needs to reach out, either forum related or personal in nature.
Again allow me to thank everyone for the opportunity to serve.

Danny Proctor
Email: dgps3@yahoo.com
Cell ph# 336-416-0491 EDT
Title: Re: Please read (re: Luap’s moderator thread)
Post by: SIR REAL ED on June 12, 2021, 01:03:24 PM
Thanks for stepping up to the plate Dan!!!
Title: Re: Please read (re: Luap’s moderator thread)
Post by: Guzzistajohn on June 12, 2021, 01:47:20 PM
 :thumb: You'll do great Danny!
Title: Re: Please read (re: Luap’s moderator thread)
Post by: Guzzi Gal on June 12, 2021, 02:14:48 PM
You da Man Dan! :bow:
Title: Re: Please read (re: Luap’s moderator thread)
Post by: Markcarovilli on June 12, 2021, 02:17:35 PM
Dan

I’m applying for “Brownie points” by saying you will be the best ever…..

Hoping also that you are in addition to and not replacing anyone.

Mark
Title: Re: Please read (re: Luap’s moderator thread)
Post by: kingoffleece on June 12, 2021, 02:29:29 PM
Cell ph# 336-416-0491 EDT  do you guys deliver?

















seriously, congratulations!
Title: Re: Please read (re: Luap’s moderator thread)
Post by: guzzisteve on June 12, 2021, 03:00:29 PM
Congrats Dan! Let's hope no one pushes your button.
Title: Re: Please read (re: Luap’s moderator thread)
Post by: jrt on June 12, 2021, 04:08:52 PM
Thank you!
J
Title: Re: Please read (re: Luap’s moderator thread)
Post by: LowRyter on June 12, 2021, 04:20:42 PM
Dan's the Man
Title: Re: Please read (re: Luap’s moderator thread)
Post by: Shorty on June 12, 2021, 04:48:35 PM
 :thumb:
Title: Re: Please read (re: Luap’s moderator thread)
Post by: Ncdan on June 12, 2021, 05:14:59 PM
Dan

I’m applying for “Brownie points” by saying you will be the best ever…..

Hoping also that you are in addition to and not replacing anyone.

Mark
No brownies necessary by me Mark, I’m just here to assist and serve👍
Title: Re: Please read (re: Luap’s moderator thread)
Post by: Ncdan on June 12, 2021, 05:17:38 PM
You da Man Dan! :bow:
GG you are much to kind Ma’am 😉
Title: Re: Please read (re: Luap’s moderator thread)
Post by: Ncdan on June 12, 2021, 05:19:32 PM
Congrats Dan! Let's hope no one pushes your button.
Thanks Steve, all my buttons have been worn out for years now😂👍
Title: Re: Please read (re: Luap’s moderator thread)
Post by: Ncdan on June 12, 2021, 05:24:14 PM
Cell ph# 336-416-0491 EDT  do you guys deliver?

















seriously, congratulations!
Maybe I should have given the phone number thing more though Mr King🤔😂😂
Title: Re: Please read (re: Luap’s moderator thread)
Post by: Huzo on June 12, 2021, 06:12:58 PM
Serious congratulations to you Dan. To be offered a position as moderator on a board as good as this, is absolute recognition of who you are regarding integrity and as a person holding a rusted on sense of fair play.
However y’all should be congratulating us members, we are the beneficiaries as a result of your appointment... :thumb:

Since it’s your first day, we might as well get you suited up and started....
I’m starting a thread about a recent ex President who disagrees with the principles of countersteering and would like to put lawnmower oil in his MGS 01. Also should he be allowed an open carry exemption for an M16 on his bike ?... :popcorn: :popcorn: :popcorn:

Seriously again, great insight by Luap. He has acknowledged that you are much loved and respected here mate, history will show you were/are a great choice.....
Now, about that thread.... :evil: :evil:
Title: Re: Please read (re: Luap’s moderator thread)
Post by: Ncdan on June 12, 2021, 06:19:55 PM
Serious congratulations to you Dan. To be offered a position as moderator on a board as good as this, is absolute recognition of who you are regarding integrity and holding a rusted on sense of fair play.
However y’all should be congratulating us members, we are the beneficiaries as a result of your appointment... :thumb:

Since it’s your first day, we might as well get you suited up and started....
I’m starting a thread about a recent ex President who disagrees with the principles of countersteering and would like to put lawnmower oil in his MGS 01. Also should he be allowed an open carry exemption for an M16 on his bike ?... :popcorn: :popcorn: :popcorn:

Seriously again, great insight by Luap. You are much loved and respected here mate, history will show you were/are a great choice.....
Now, about that thread.... :evil: :evil:
Lol Pete, no worries mate as I had already decided you would be on my “refer to Luap and Rocker list anyhow😂😂😂😂😂 now what say you now😂😂😂.
You know your my buddy Pete👍
Title: Re: Please read (re: Luap’s moderator thread)
Post by: Bulldog9 on June 12, 2021, 08:57:45 PM
Outstanding.....
Title: Re: Please read (re: Luap’s moderator thread)
Post by: SmithSwede on June 12, 2021, 10:03:43 PM
Thank you Dan.  I’m not sure if you fully appreciate what you have signed up for.   That’s where courage and dedication fill in the gaps !
Title: Re: Please read (re: Luap’s moderator thread)
Post by: Ncdan on June 12, 2021, 10:19:21 PM
Thank you Dan.  I’m not sure if you fully appreciate what you have signed up for.   That’s where courage and dedication fill in the gaps !
Lol SS, I’ve heard that phrase before. What could possibly go wrong with a great bunch of folks like has accumulated here in the WG forum 🤔
Title: Re: Please read (re: Luap’s moderator thread)
Post by: Huzo on June 13, 2021, 01:10:57 AM
Lol SS, I’ve heard that phrase before. What could possibly go wrong with a great bunch of folks like has accumulated here in the WG forum 🤔
Yep.
I was watching a thing on the formation of spiral galaxies, most enlightening...!
It occurred to me that the mass of coalescing gas and debris is attracted by gravity and forms a nucleus from which information and life forms. A metaphor for WG members it seems.
Then I got the bad news..
There’s a thing in the middle called a “black hole” from which everything that enters is doomed to eternity...
Even light....! :clock: :clock: :popcorn: :popcorn: :grin:
Title: Re: Please read (re: Luap’s moderator thread)
Post by: Ncdan on June 13, 2021, 07:43:26 AM
Yep.
I was watching a thing on the formation of spiral galaxies, most enlightening...!
It occurred to me that the mass of coalescing gas and debris is attracted by gravity and forms a nucleus from which information and life forms. A metaphor for WG members it seems.
Then I got the bad news..
There’s a thing in the middle called a “black hole” from which everything that enters is doomed to eternity...
Even light....! :clock: :clock: :popcorn: :popcorn: :grin:
Now that could be your new thread Pete, BLACK HOLES, I’m sure nothing could go wrong with that one🤔
Title: Re: Please read (re: Luap’s moderator thread)
Post by: bodine99 on June 13, 2021, 08:23:23 AM
Very good & Thankyou!!!!!
Title: Re: Please read (re: Luap’s moderator thread)
Post by: Huzo on June 13, 2021, 08:36:43 AM
Now that could be your new thread Pete, BLACK HOLES, I’m sure nothing could go wrong with that one🤔
Not with you in charge it won’t.
Title: Re: Please read (re: Luap’s moderator thread)
Post by: Milosh on June 13, 2021, 09:03:27 AM
Thank you Dan.

Basically it's no  :boxing:
Title: Re: Please read (re: Luap’s moderator thread)
Post by: sidecarnutz on June 13, 2021, 09:33:05 AM
You volunteered to herd cats! You're a braver and more patient man than I am! ;-)
I'll try to not be one of your problems in the future.  :bow:
Title: Re: Please read (re: Luap’s moderator thread)
Post by: LowRyter on June 13, 2021, 10:13:47 AM
Perhaps this is a good time to review and reflect.

1.  Let the moderator do his job without pushing it.  He tries to keep it straight so let him do it without prodding him.   I don't see a reason that members should go to the moderator when someone is offended by a post.  A tactful response on the thread should be the first step.  After that, perhaps a PM?  And even if that doesn't solve one's irritation, wouldn't the ignore button be better option than going to the moderator?     

2.  Long gone members.  There are some members banned that I personally enjoyed their chit chat, even if I disagreed with them 99% of the time.  The other side of the coin is grief they gave to the moderators time and again.  This could be related to my first point, don't rag on the mods.  If your post is removed, don't make a federal case out of it.  No one wants constant irritation, not even a moderator, and in most of these cases it had gone on for years and with several mods.

3.  If it's not fun anymore, take a break.  Come back when you feel better about things.  I certainly hope we see some of our favorites here come back even after a public spat.   The whole reason we're here is the discussion and interaction.  The more the merrier.  When you take a break and become "merry" again, most of us want you to come back.

Excuse me, I have to go now and chase an elephant out my room.
Title: Re: Please read (re: Luap’s moderator thread)
Post by: Ncdan on June 13, 2021, 10:49:32 AM
Perhaps this is a good time to review and reflect.

1.  Let the moderator do his job without pushing it.  He tries to keep it straight so let him do it without prodding him.   I don't see a reason that members should go to the moderator when someone is offended by a post.  A tactful response on the thread should be the first step.  After that, perhaps a PM?  And even if that doesn't solve one's irritation, wouldn't the ignore button be better option than going to the moderator?     

2.  Long gone members.  There are some members banned that I personally enjoyed their chit chat, even if I disagreed with them 99% of the time.  The other side of the coin is grief they gave to the moderators time and again.  This could be related to my first point, don't rag on the mods.  If your post is removed, don't make a federal case out of it.  No one wants constant irritation, not even a moderator, and in most of these cases it had gone on for years and with several mods.

3.  If it's not fun anymore, take a break.  Come back when you feel better about things.  I certainly hope we see some of our favorites here come back even after a public spat.   The whole reason we're here is the discussion and interaction.  The more the merrier.  When you take a break and become "merry" again, most of us want you to come back.

Excuse me, I have to go now and chase an elephant out my room.
Thanks for the heart felt response John as you have touched on the points I made in my acceptance post and I’m sure many will agree with the core of your personal thoughts.
Title: Re: Please read (re: Luap’s moderator thread)
Post by: DougG on June 13, 2021, 12:02:29 PM
Hi Danny,                                                                                                                     6-13-21

Many thanks for taking on this sometimes thankless job.   :bow:

Be well, stay well,
DougG
Title: Re: Please read (re: Luap’s moderator thread)
Post by: Ncdan on June 13, 2021, 10:06:22 PM
Hi Danny,                                                                                                                     6-13-21

Many thanks for taking on this sometimes thankless job.   :bow:

Be well, stay well,
DougG
Thanks Doug. I’m hopeful I can serve the WG forum well👍
Title: Re: Please read (re: Luap’s moderator thread)
Post by: twowheeladdict on June 14, 2021, 08:38:20 AM
Dan,  I am not surprised that you are now a moderator based on your posts I have read, as well as your PMs.

Looking forward to fair and impartial moderation of the WildGuzzi Forum. 
Title: Re: Please read (re: Luap’s moderator thread)
Post by: Huzo on June 14, 2021, 08:56:44 AM
Dan,  I am not surprised that you are now a moderator based on your posts I have read, as well as your PMs.

Looking forward to fair and impartial moderation of the WildGuzzi Forum.
+1
Title: Re: Please read (re: Luap’s moderator thread)
Post by: Huzo on June 14, 2021, 09:05:55 AM
I don’t want to embarrass the guy by shining a light too brightly, but hats off to he who had sufficient insight into human nature to see Dan as a worthy replacement for an acknowledged gentleman.
Dusty is a wonderful guy and and became a seamless moderator...I miss him a lot.
Dan is a born moderator.
In life..
In work..
In the WG forum..
A gentle, relentless force with a smile as broad as his life experience.
Title: Re: Please read (re: Luap’s moderator thread)
Post by: Guzzistajohn on June 14, 2021, 11:31:28 AM
I don’t want to embarrass the guy by shining a light too brightly, but hats off to he who had sufficient insight into human nature to see Dan as a worthy replacement for an acknowledged gentleman.
Dusty is a wonderful guy and and became a seamless moderator...I miss him a lot.
Dan is a born moderator.
In life..
In work..
In the WG forum..
A gentle, relentless force with a smile as broad as his life experience.

 :thumb:  :laugh: