Wildguzzi.com

General Category => General Discussion => Topic started by: Stevex on July 27, 2021, 12:12:23 PM

Title: LM2 fairing dayglo
Post by: Stevex on July 27, 2021, 12:12:23 PM

Im thinking of adding the dayglo flash to my LM2s fairing.
Has anyone done a similar job?; did you spray or go with a decal?

Title: Re: LM2 fairing dayglo
Post by: huub on July 27, 2021, 03:05:13 PM

I bought a sheet of self adhesive dayglo foil, and made the sticker myself

Title: Re: LM2 fairing dayglo
Post by: dsrdave on July 27, 2021, 05:03:49 PM

I believe the OE was a decal on the cx100

Title: Re: LM2 fairing dayglo
Post by: Stevex on July 28, 2021, 06:08:59 AM

Quote from: huub on July 27, 2021, 03:05:13 PM

I bought a sheet of self adhesive dayglo foil, and made the sticker myself

My only worry would be cutting the edges, I guess laser cut would be the way to go; how did you fabricate yours, please don't say scissors?  :grin:
Do you have a photo of your finished article?

Quote

I believe the OE was a decal on the cx100

I did read that they were available from the US, but I've only managed to find the LM3 items.

Title: Re: LM2 fairing dayglo
Post by: Dukedesmo on July 28, 2021, 07:50:02 AM

I don't have it fitted any more as I replaced it with an LM1 fairing but the original on mine has dayglo orange on the front. I assume this is how it came from the factory? and they do appear to be stuck on.


(https://www.ducatiforum.co.uk/data/photos/l/5/5513-1427998848-e3d2e2c757fab6c95a70e1ef974e5b2b.jpg)


(https://www.ducatiforum.co.uk/data/photos/l/11/11331-1627476401-d75f16f972c3f8a6c72ae958e0ef1e57.jpg)

Title: Re: LM2 fairing dayglo
Post by: huub on July 28, 2021, 08:27:01 AM

Quote from: Stevex on July 28, 2021, 06:08:59 AM

My only worry would be cutting the edges, I guess laser cut would be the way to go; how did you fabricate yours, please don't say scissors?  :grin:
Do you have a photo of your finished article?

I did read that they were available from the US, but I've only managed to find the LM3 items.

easier , i used a stanley knife and steel ruler ....
they are pretty straightforward shape

Title: Re: LM2 fairing dayglo
Post by: Stevex on September 16, 2022, 05:47:10 AM

Stein-Dinse have started selling a decal set, so I ordered and fitted them.
My camera can't cope too well with the dayglo, so it looks more like yellow in the photo.
The fairing is an Airtech item and although the paint scheme is based on original, it varies from standard; however, I like how it has turned out.


(https://i.ibb.co/MVTHsJF/IMG-1479.jpg) (https://ibb.co/MVTHsJF)

Title: Re: LM2 fairing dayglo
Post by: Matteo on September 17, 2022, 12:03:08 PM

Stucchi sells them too:


    DCL142929   
    LE MANS 2 FLUORESCENT SCREEN DECAL 4-PIECE KIT   
    4,10 €