Wildguzzi.com
General Category => General Discussion => Topic started by: SIR REAL ED on October 20, 2021, 11:19:12 AM
-
I had change a 11x4.00-5 tubeless tire lately. Kinda of a pain, since the wheel is so small it is hard to hang on to. I was going to make a quick bolt down stand to hold the wheel, but after a bit of thought I used some C-Clamps to force the tire where I needed it and then hold it into place.
A bit of liquid hand soap for lube, and easily mounted with some 15" tire irons!!!
Redneck Engineering kicks butt!!!!
(https://i.ibb.co/9v5KjTr/11x4-00-5.jpg) (https://ibb.co/9v5KjTr)
-
I replaced the front tires on my zero turn last year and ended up buying the HF small wheel tire machine. Worked okay but those small tires are a PITA to change. Glad it’s a once a decade type thing
The first side of the tire went on pretty easily. The second side was tough, until I got out the C-Clamps. It was like having 5 hands (smaller and much stronger than my own) to change the tire. Overall, it was a lot easier than I expected it to be.
-
I replaced the front tires on my zero turn last year and ended up buying the HF small wheel tire machine. Worked okay but those small tires are a PITA to change. Glad it’s a once a decade type thing
10 bux at the local tire store.. money well spent.
-
I would rather not spend one second of the rest of my life in a tire store.. So I wont..
Guzzi tires go on today/tomorrow. Delivered to my door.. :grin:
PS-this is cheating.. :evil:
(https://i.ibb.co/0sSQvNz/KONICA-MINOLTA-DIGITAL-CAMERA.jpg) (https://ibb.co/0sSQvNz)
(https://i.ibb.co/1vgJcgM/KONICA-MINOLTA-DIGITAL-CAMERA.jpg) (https://ibb.co/1vgJcgM)
(https://i.ibb.co/xmVRsX3/KONICA-MINOLTA-DIGITAL-CAMERA.jpg) (https://ibb.co/xmVRsX3)
(https://i.ibb.co/TmgXChN/KONICA-MINOLTA-DIGITAL-CAMERA.jpg) (https://ibb.co/TmgXChN)