Wildguzzi.com
General Category => General Discussion => Topic started by: guzziownr on December 14, 2021, 01:56:31 PM
-
I just bought a new-to-me '13 Griso and am now perilously short of motorcycle spending money.
I had Knight Design lowered pegs on a previous Griso but got sticker shock this time around. Perhaps something made in China...
Aprillia pegs and Guzzi pegs are the same, right? How about a Tuono V4R, that is pretty racey: https://www.amazon.com/gp/product/B075CKX178/ref=ppx_yo_dt_b_asin_title_o03_s00?
(https://i.ibb.co/yVJGPFK/sES7xZZ.jpg) (https://ibb.co/yVJGPFK)
Perfect fit and multiadjustable. I put them down and a little back.
(https://i.ibb.co/wMNpg6y/x6Btyey.jpg) (https://ibb.co/wMNpg6y)
Ignore the Blue lock-tite drooling, I wiped it off.
(https://i.ibb.co/r386ZYw/2iOvdF9.jpg) (https://ibb.co/r386ZYw)
-
I have the Knights on my Griso, and although they are a work of art, but,they were put on by the original owner, who was much less a cheapskate than myself! :laugh: If I were to do it on my dime, I would probably go with what you did, which looks very nice.
it amazes me at some of the machined stuff coming out of China for "peanuts". I just bought a set of Roxx Riser copys for my Ural for 35 bucks shipped. Yeah, one of the bolts had a defective head, which I replaced with a bolt from my accumulated assortment. The risers themselves seem well machined, and fit as they should, offering the adjustability I was looking for , at $100. less. I figgured what the heck, its for the Ural, Russian castings are not exactly world class! :wink:
Rick
-
Save your pennies, buy the knight design. ONE and done. Worth it.
-
Bear in mind that the knight pegs put your feet out slightly wider than stock, probably any lowered pegs do this... But worth remembering. I have a bit of a reach in to the shift pedal with the knight lowered pegs....
beautifully made though
-
Bear in mind that the knight pegs put your feet out slightly wider than stock, probably any lowered pegs do this... But worth remembering. I have a bit of a reach in to the shift pedal with the knight lowered pegs....
beautifully made though
I had the Knight Design pegs and the offset on these is about the same. I take a 14 W boot so the foot controls are easy to find.
-
I have installed Honda Goldwing 1800 pegs on my Stornello huge improvement over the solid stock ones. They are slightly lower and wide enough to clear the 2:1 exhaust on right side .They seem well made at $50 absorb any vibes and my boots don't slip off. Older model Honda pegs fit straight on V7s 5 minute job..
-
I have installed Honda Goldwing 1800 pegs on my Stornello...
Those look comfy!